“Without data you’re just a person with an opinion,” says Giovanni Palamà. For the data &amp; measurement specialist, entrepreneur, and founder of <a data-gid="gid://syiq/Company/8890" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="SailADV Group (Company)">SailADV</a>, the quote is not a provocation – it is the premise on which he built an entire company.&nbsp;After years as a professional sailor on the international race circuit, Giovanni Palamà understands that performance on the water is never the product of instinct alone: it is the result of consistent, objective and repeatable measurement.&nbsp;“When I left racing and moved into consultancy, I realised the superyacht industry lacked this scientific discipline,” he says. “Extremely complex vessels were being delivered, yet there was no standardised way to quantify whether they actually performed according to their design. I founded <a data-gid="gid://syiq/Company/8890" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="SailADV Group (Company)">SailADV</a> in 2015 to answer that question.”<img src="https://photo-assets.superyachttimes.com/photo/396519/image/large-66c4d58023dbf7660b99d59595acd406.jpg" data-gid="gid://syiq/Photo/396519">By not only gathering but also precisely interpreting data, <a data-gid="gid://syiq/Company/8890" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="SailADV Group (Company)">SailADV</a> is going beyond the limits of “traditional” industry processes. It works with the major Italian shipyards to provide sea-trial analyses, onboard monitoring and long-term performance assessment via a broad spectrum of diagnostic data, including vibration readings, power-management behaviour, thermographic imagery, 3D scans, strain-gauge load measurements, and its onboard AI platform D.gree.The goal is not simply to identify faults, but to understand how every component behaves within the broader system. This is where the approach becomes transformative. Indeed, at <a data-gid="gid://syiq/Event/285" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Metstrade - 2025">Metstrade 2025</a> the company presented itself as <a data-gid="gid://syiq/Company/8890" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="SailADV Group (Company)">SailADV Group</a>, where “group” is intended as a set of multidisciplinary services and brands, organised into specialised areas covering the entire yacht lifecycle, from management and analysis to value preservation and innovation.With operational offices in Ancona, Pisa and La Spezia in Italy, a service point in Palma de Mallorca, and an innovation hub in Palo Alto, California, <a data-gid="gid://syiq/Company/8890" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="SailADV Group (Company)">SailADV</a> employs technologies rarely seen outside high-end industrial sectors. Motion Amplification, for example, transforms ordinary video into a magnified analysis tool that reveals vibrations far too subtle for the human eye to see – vibrations that can lead to premature wear, reduced efficiency, or outright failure. And as diesel-electric and hybrid propulsion systems become the norm, high-frequency sampling is used to detect issues that traditional monitoring systems would miss. These measurement techniques allow shipyards and crew to shift from reactive maintenance to true condition-based maintenance.“In commercial shipping, predictive maintenance is standard,” says Palamà. “But superyachts behave differently. Their operational profiles vary dramatically from vessel to vessel, making uniform maintenance intervals unreliable. A charter yacht that spends its summer shuttling between Sardinia and the Amalfi Coast wears very differently from one that crosses the Atlantic or spends long periods at anchor.”Because every supplier uses its own communication protocol, <a data-gid="gid://syiq/Company/8890" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="SailADV Group (Company)">SailADV</a> has designed its systems to ‘speak’ with virtually every machine on board, from the main engines to the stabilisers and HVAC system. The company has a multi-year programme with both <a data-gid="gid://syiq/Company/6046" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Azimut-Benetti Group (Company)">Azimut|Benetti</a> and <a data-gid="gid://syiq/Company/374" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Sanlorenzo (Company)">Sanlorenzo</a> to optimise the performance of their superyacht fleet. During sea trials of all <a data-gid="gid://syiq/Company/212" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Benetti SpA (Company)">Benett</a>i’s 100-metre-plus yachts, for example, it used its own certified technology to log up to 5,000 variables.“The results are measurable,” continues Palamà. “For example, after monitoring a <a data-gid="gid://syiq/Company/212" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Benetti SpA (Company)">Benetti</a> Tradition for several seasons, we recommended switching propellers – a change that saved roughly €30,000 in fuel in a single season.”Also during <a data-gid="gid://syiq/Company/4374" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Metstrade (Company)">Metstrade</a>, <a data-gid="gid://syiq/Company/8890" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="SailADV Group (Company)">SailADV</a> presented its newest development: D.gree V26, and its first AI Agent, Sailly, as the industry moves toward intelligent autonomy at sea. Offered in three configurations – One, Pro and Ultra – D.gree V26 is designed to adapt to both new-build and refit projects by fully leveraging intelligent node technology. Accessible both locally and remotely, the system is aboard a current fleet of around 70 yachts (expected to grow to 300 within three years), processing over 5 million data points per hour and predicting failures before they occur. <img src="https://photo-assets.superyachttimes.com/photo/396518/image/large-6c625f4bf1121bf5cbf12eb760b705ae.jpg" data-gid="gid://syiq/Photo/396518">D.gree can also track external conditions, such as weather, to provide an even more complete picture of the yacht’s actual operating environment. The benefits ripple across the industry: owners gain transparency and asset protection; captains receive a clear overview; engineers can plan work rather than firefight; fleet managers can monitor multiple vessels through a single coherent system; and shipyards are able to draw on a continuous closed loop between design, operations and service.As younger, more tech-oriented owners enter the market, expectations are shifting. They demand accountability, connectivity and smarter systems. Anchored by solid engineering and strengthened by data, <a data-gid="gid://syiq/Company/8890" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="SailADV Group (Company)">SailADV</a> is working to meet those expectations. In a sector built on craftsmanship, beauty and tradition, the company aims to bring something more tangible: proof. And as Palamà likes to remind people, in modern yachting, proof is power.

What data reveals about a superyacht’s operating environment

SailADV employee monitoring engine room onboard a superyacht 

original

small

medium

large

extra_large

Giovanni Palamà, Founder of SailADV Group

SailADV founder Giovanni Palamà explains how data, diagnostics and AI-led monitoring are changing superyacht performance analysis and maintenance.

SailADV: What data reveals about a superyacht’s operating environment

SailADV: what data reveals about a superyacht’s operating environment thumbnail image 

Just as physical tank test models are giving way to computational fluid dynamics, so another form of virtual modelling is coming to the fore – the digital twin. But what is a digital twin, and how can we use them to streamline superyacht design, construction and operation?Providing an exact definition of a digital twin can be tricky, not least because different people use the term in different ways. With conceptual origins tracing back to NASA in the 1960s, the truth is that digital twins come in a variety of forms and offer multiple applications – all of which have the potential to change the approach to design and enhance the operational effectiveness of superyachts.“I haven’t found a consistent way that people use the term,” says software developer Boudewijn van Groos. “For example, some call a simple 3D model a digital twin, even if it doesn’t make predictions. It might show live sensor data from the vessel, but it’s really just a portal into the actual ship. That is fundamentally different to a software model that mimics the behaviour of a system based on physical or statistical calculations. Yet people refer to both as digital twins.”Models created in a software environment are arguably the purest form of digital twinning. They are increasingly being used both to train AI and to enable systems developers to code the core parts of a yacht’s controllers while the physical yacht itself is still in build – a decisive factor when faced with tight construction and delivery schedules.<img src="https://photo-assets.superyachttimes.com/photo/397081/image/large-c63a38ee887c535cd43a28154e353077.jpeg" data-gid="gid://syiq/Photo/397081">Virtual virtuesVan Groos is leading a team of software developers who are undertaking the coding of a multifaceted monitoring and control system aboard Project Zero, the renewables-powered sailing yacht under construction at <a data-gid="gid://syiq/Company/34" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Vitters Shipyard (Company)">Vitters Shipyard</a>. In collaboration with German company XRG Simulation, they have been building a virtual version of the yacht’s systems in Modelica, which allows them to write the code for the programmable logic controller (PLC) for the thermal harvesting and recovery system, for example, and test it before the physical system has been completed. While the team has also been using a current sailing superyacht as a test bed, creating a digital twin has brought additional benefits.&nbsp;<img src="https://photo-assets.superyachttimes.com/photo/397079/image/large-c1ba2f94baf775740a49c5322a0b5621.jpg" data-gid="gid://syiq/Photo/397079">“For everything we’re doing we first write the physical thing into code to form the digital twin,” Van explains. “That simulation can be very basic, or a deep mechanical simulation. It gives us an opportunity to prevent regression bugs and it means we can avoid having to run our code on a physical system that means needing the real machine every time, which is just a hassle.”Developing a digital twin not only creates a platform for virtual testing, it also provides an opportunity to explore or to train AI, which can have real-world applications in a finished project. Indeed, this is the approach that <a data-gid="gid://syiq/Company/3559" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Videoworks Group (Company)">Videoworks</a> and <a data-gid="gid://syiq/Company/1080" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Rossinavi (Company)">Rossinavi</a> took, in collaboration with the University of Pisa, to develop the systems on the 42.84-metre superyacht <a data-gid="gid://syiq/Yacht/12135" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Seawolf X42.84m (140'7&quot;)Rossinavi2024">Seawolf X</a> catamaran.“On a yacht you have a lot of very high-tech systems, each optimised and each with sensor actuators,” explains Maurizio Minossi, CEO and CTO of <a data-gid="gid://syiq/Company/3559" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Videoworks Group (Company)">Videoworks</a>. “The idea is to create a sort of manager that grabs the data coming from the different subsystems and, thanks to the use of AI algorithms, gives it added value in terms of monitoring and control.”<img src="https://photo-assets.superyachttimes.com/photo/397078/image/large-3bbe7f4296cb60275d58eb400d1d5976.jpg" data-gid="gid://syiq/Photo/397078">“AI algorithms need to train on something – you need a story,” adds Sergio Saponara, director of the Department of Informational Engineering at the University of Pisa. “But if the technology is new, how do you create that story? Creating a digital model of a yacht allows you to fill the AI with data. You analyse the chiller in a model, then you combine it with all the other models to create the whole ship.”The system they have developed, which has been designed to be modular for use across multiple yacht designs and configurations, integrates various network-connected sensors, smart plugs, and actuators, such as HVAC systems, lighting, and automated blinds, orchestrated by an advanced AI algorithm. The digital twin enables the simulation of different configurations and operational scenarios, generating virtual data that can be used to train AI models – a useful approach given the challenges of limited experimental data on energy consumption and passenger habits.&nbsp;<img src="https://photo-assets.superyachttimes.com/photo/397077/image/large-efe714be9d6f415bcddaf70b66ca2da0.jpg" data-gid="gid://syiq/Photo/397077">Test rig&nbsp;It’s not just in systems design that digital twins are being utilised. For Dale Morris, Group Head of Global Design at <a data-gid="gid://syiq/Company/2447" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Southern Spars (Company)">Southern Spars</a>, the development of digital twins has enabled advanced, in-the-box testing before a rig is stepped – a serious advantage given the one-off nature and complexity of superyacht masts and sail plans.&nbsp;“The outcome is what’s on the water, but the model that came before it has been through all the conditions,” he says. “It starts with base mast properties, rigging pre-tension and tuning, but we add in the actual moulded sail shape and structural files from North Sails, and then we can assess the rig to a whole other level.”<img src="https://photo-assets.superyachttimes.com/photo/397082/image/large-2efc90f958531c34f23220a01c23ffdf.jpg" data-gid="gid://syiq/Photo/397082">This allows the team to see the effect of their rig design choices even down to its impact on the actual shape of the sails. They can go into a whole CFD loop, where the fluid structure interaction (FSI) loops back into the non-linear FEA – non-linear because the mast is flexible. That essentially means they can sea-trial the yacht before any carbon fibre even gets laid in the mast mould.“That also flows through into how we communicate the safe operation to the customer with all the sheet runs and all the load interfaces, so that boatbuilders can build-in the right safety factors,” &nbsp;Morris explains. “You can assess all that within the digital twin.”It also impacts the initial sea trial phases because, rather than the traditional method of stepping a mast and eyeballing the rig to tune it and ensure it is set up symmetrically, it can effectively be pre-set. Gone are the days where you put the rig in, go sailing and flop from tack to tack, make changes, rinse and repeat, which can be a two-day operation.“We are able to virtually go sailing before we even put carbon in the mast tooling, and for yacht designers, owners and crew that’s a huge benefit because it elevates confidence before you get further into the project,” &nbsp;says Vincent Guiot, Group Sales Director at <a data-gid="gid://syiq/Company/2447" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Southern Spars (Company)">Southern Spars</a>. &nbsp;Further, the applications extend to the operational phase. By using the information from the load sensors from specific conditions. If something doesn’t look quite right, the team can plug that data back into the digital twin and help someone on board diagnose the issue more efficiently.<img src="https://photo-assets.superyachttimes.com/photo/397080/image/large-77d39333b2a17751661ad462a20fdfc0.jpg" data-gid="gid://syiq/Photo/397080">Practical magic&nbsp;As CAD has advanced, so 3D models have become commonplace, not only in terms of determining the underlying engineering layout of a vessel but also to ensure the vessel can be built as efficiently as possible. But when one superyacht project approached Dutch company Goltens to take that 3D model further, the potential for an all-encompassing digital twin quickly became apparent.“Normally we design, engineer and create 3D models, and during that process a lot of information on the components – size, material, capacity, make, model – is put into a database,” says Sandra Jutte of Goltens’ Green Technologies division. “But when the vessel departs, most of that information, which can number thousands of data files, stays behind. For this project, we were asked how we could collect all the engineering data in one place during construction and use it to make the yacht smarter in operation.”<img src="https://photo-assets.superyachttimes.com/photo/397085/image/large-8490e120db5880a524554f471c7eb9b6.png" data-gid="gid://syiq/Photo/397085">To achieve that, the Goltens team combined ongoing 3D scanning during the build with CAD and engineering drawings to create a digital version of Project Zero that is a perfect match for the real thing. The result is that all the information on the build, systems and components is available for easy access – especially useful when it comes to fault-finding or in the event of a system alarm.&nbsp;“You need an exact copy of the yacht, so during the entire build our team has been on site with a 3D scanner capturing every stage of the build,” says Jutte. “We’ve scanned every detail, including 100,000 metres of cables and six kilometres of piping.”<img src="https://photo-assets.superyachttimes.com/photo/397086/image/large-39fff693692206113bdc5e36b8ec672b.png" data-gid="gid://syiq/Photo/397086">Every pump, pipe and system is connected and with e-sharing it’s possible to click into the engineering drawing and instantly jump to the same spot in the 3D model, and vice versa. All relevant details and spare parts listings are available with a click. What’s more, the digital twin will form the backbone for predictive maintenance and, potentially, AI-rooted energy efficiency and systems analysis during the operational phase – an aspect that could have huge impact for a project where every kilowatt counts.The potential goes further, however, because wherever the vessel goes, the digital twin goes too. This means designers can use the digital twin to experiment with new ideas or test layouts without ever touching the real vessel, while engineers can follow system performance and simulate improvements, and and owners can explore their yacht anytime, anywhere.&nbsp;<img src="https://photo-assets.superyachttimes.com/photo/397087/image/large-8c4ef31785ce28bc95f037d27cf282ff.jpg" data-gid="gid://syiq/Photo/397087">Such a comprehensive scan-based digital twin improves maintenance aspects – with all manuals and spare parts lists easily accessible, and with the potential to add predictive maintenance algorithms – but also aids efficiency in a refit phase.&nbsp;“Refits and repairs are no longer a guessing game,” says Jutte. “Because if a component needs to be replaced or a new component fitted, the digital twin already knows what’s there currently and if the new one will fit. It means you can order or prefabricate parts with confidence. It’s a complete feedback loop between design, operation, maintenance, fault-finding and improvement.”<img src="https://photo-assets.superyachttimes.com/photo/397089/image/large-cbdce16aec81ad92d4d28edb2f355442.png" data-gid="gid://syiq/Photo/397089">

How is virtual modelling transforming superyacht design and operation

From rig testing to predictive maintenance, digital twins are reshaping how superyachts are designed, built and operated.

<a data-gid="gid://syiq/Company/5438" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Akerboom Yacht Equipment (Company)">Akerboom Yacht Equipment</a>&nbsp;has earned a prominent position in the superyacht supply chain for its bespoke boarding equipment, platforms, cranes, watertight doors and integrated control systems. Yet the engineering philosophy behind its custom-designed solutions is based on a resolutely modular approach.When Mervyn van der Ploeg was appointed managing director of <a data-gid="gid://syiq/Company/5438" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Akerboom Yacht Equipment (Company)">Akerboom Yacht Equipment</a> in 2015, the company was going through a bad patch. It routinely redesigned everything from scratch for each new yacht project, leading to prototype-level inefficiencies and financial strain. A small but telling example is that it used to produce 32 different types of locking pins. Today, through a process of standardisation and modularisation, that number has been reduced to just two sizes.<img src="https://photo-assets.superyachttimes.com/photo/396743/image/large-c20dda6c39f046eea94eaa71057b9e2c.jpg" data-gid="gid://syiq/Photo/396743">“Previously, when designing a platform for a yacht, four different locking pins might have been specified, requiring multiple suppliers,” explains van der Ploeg. “Now, we buy 200 locking pins per year in two sizes from a single supplier at half the cost.”The process began by redesigning a prototype passerelle from scratch using a fully modular approach, which then became a template for other equipment. While remaining a supplier of custom equipment, modular components are now reused across <a data-gid="gid://syiq/Company/5438" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Akerboom Yacht Equipment (Company)">Akerboom</a>’s product range, reducing design complexity and streamlining production.“A key technical insight came from looking outside the yachting industry,” continues van der Ploeg. “For example, swivel joints originally designed for excavators have been incorporated into our gangways. These components are proven, industrial-grade and standardised, which means we can build highly reliable systems without reinventing core mechanisms.”In the ten years since van der Ploeg joined the company, turnover has more than doubled from €12 million to €25 million, driven by increased efficiency along with larger yachts and a rising demand for integrated equipment.<img src="https://photo-assets.superyachttimes.com/photo/396739/image/large-d48d0f06ceeb5a00cfda9bafe1c96878.jpg" data-gid="gid://syiq/Photo/396739">Make it modularThe spin-off from <a data-gid="gid://syiq/Company/5438" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Akerboom Yacht Equipment (Company)">Akerboom</a>’s modular way of thinking are innovations designed to maximise open space while eliminating visual clutter. Many of these solutions revolve around relocating drive systems into hinge lines and the platform structures themselves. In one recent project, a large side platform was initially conceived as two separate elements with a manually installed infill piece. While technically feasible, it was operationally awkward. Instead, by introducing an internal hinge drive already proven elsewhere, the entire system was re-engineered as a single monolithic platform. The infill was eliminated, deployment became faster, crew workload was reduced, and the geometry became cleaner.<img src="https://photo-assets.superyachttimes.com/photo/396744/image/large-4feaec6057dc57f70fe27a2f2a88296b.jpg" data-gid="gid://syiq/Photo/396744">The Sliding Stairs Access Hatch is another example. Developed in response to a request to optimise the passage from the main deck to the beach platform on <a data-gid="gid://syiq/Company/29" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Feadship (Company)">Feadship’s</a> 79.5-metre <a data-gid="gid://syiq/Yacht/11677" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Valor79.5m (260'10&quot;)Feadship2025">Valor</a>, <a data-gid="gid://syiq/Company/5438" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Akerboom Yacht Equipment (Company)">Akerboom</a>’s engineers merged door, hatch and boarding equipment components to create a completely new solution. Essentially, the staircases on each side of the pool form the hatch itself, with half of each staircase retracting into the deckhead like a gangway to provide access to the beach club.<img src="https://photo-assets.superyachttimes.com/photo/396742/image/large-bd76338bca2c0e5436acede35e416f93.jpg" data-gid="gid://syiq/Photo/396742">“This marked a next step in modular engineering for <a data-gid="gid://syiq/Company/5438" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Akerboom Yacht Equipment (Company)">Akerboom</a>,” says van der Ploeg. “Our approach not only accelerated the development process, but also showed how modularity enables flexible, cross-disciplinary solutions without compromising quality.”As both staircases form part of the watertight boundary of the vessel certified by Class, one of the main challenges was ensuring watertight integrity, given the angle at which the stair hatches are installed, as well as aligning the treads between the hatches and the fixed structures. In fact, sealing has become a central issue as stern structures grow more complex – folding, rotating and closing at compound angles. While inflatable seals are often the go-to solution and offer excellent theoretical performance, they also represent a single point of failure. <a data-gid="gid://syiq/Company/5438" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Akerboom Yacht Equipment (Company)">Akerboom</a> typically prefers D-profile rubber seals, which wear gradually, remain locally manageable, and allow temporary mitigation.<img src="https://photo-assets.superyachttimes.com/photo/396741/image/large-cf52ffb86158af5f4ac7a5922058d9b5.jpg" data-gid="gid://syiq/Photo/396741">“This approach is especially critical for Lloyd’s-certified watertight items such as split transom doors closing at different angles, where corners and junctions between curved surfaces become critical failure points,” van der Ploeg points out.Such solutions highlight how <a data-gid="gid://syiq/Company/5438" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Akerboom Yacht Equipment (Company)">Akerboom</a> has evolved beyond developing hardware to innovating the onboard experience, a strategy that has resulted in multiple patented solutions, from pop-up gangways embedded in the stern platform to protective cabrio covers engineered to fold, stack or nest completely out of sight when not in use. At the last edition of <a data-gid="gid://syiq/Company/4374" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Metstrade (Company)">Metstrade</a>, the company presented five interactive aft deck models through immersive 3D visualisations showcasing how engineering, design and user experience increasingly converge in the early phases of yacht development.<img src="https://photo-assets.superyachttimes.com/photo/396745/image/large-b406b1bef2a73b0811b05344a273be7e.jpg" data-gid="gid://syiq/Photo/396745">Under controlAnother defining feature of <a data-gid="gid://syiq/Company/5438" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Akerboom Yacht Equipment (Company)">Akerboom</a>’s approach is that its control systems and programming are all developed in-house. Precise timing between electronic commands, hydraulic oil flow and mechanical motion is critical, as are programmed delays that account for inertia and mass. Most systems employ frequency-driven power packs rather than simple on/off hydraulics, resulting in smoother movement, lower noise levels and the elimination of hydraulic ‘hammer’ effects. Automated operating cycles manage sequencing, speed and end-of-stroke deceleration automatically, reducing the risk of impact damage and operator error. Before delivery, full functional testing is carried out in-house, often with owner representatives present.Enclosed helicopter lifts represent some of the most complex control systems <a data-gid="gid://syiq/Company/5438" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Akerboom Yacht Equipment (Company)">Akerboom</a> has delivered. On yachts such as the 85.95-metre <a data-gid="gid://syiq/Company/29" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Feadship (Company)">Feadship</a> superyacht <a data-gid="gid://syiq/Yacht/234" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Ecstasea85.95m (281'12&quot;)Feadship2004">Ecstasea</a>, the 96.6-metre <a data-gid="gid://syiq/Company/29" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Feadship (Company)">Feadship</a> superyacht <a data-gid="gid://syiq/Yacht/5936" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Sophia96.6m (316'11&quot;)Feadship2017">Sophia</a> (ex-Faith), 99-metre <a data-gid="gid://syiq/Company/29" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Feadship (Company)">Feadship</a> superyacht <a data-gid="gid://syiq/Yacht/2074" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Madame Gu99.0m (324'10&quot;)Feadship2013">Madame Gu</a> and the 102.6-metre <a data-gid="gid://syiq/Company/29" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Feadship (Company)">Feadship</a> superyacht <a data-gid="gid://syiq/Yacht/10678" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Ulysses102.6m (336'7&quot;)Feadship2024">Ulysses</a>, these lift assemblies rely on synchronised spindles and highly precise control algorithms to ensure uniform vertical motion. Ironically, real-world usage of helicopter lifts has revealed an interesting pattern:&nbsp;<img src="https://photo-assets.superyachttimes.com/photo/396746/image/large-793a08021cda2fc7bab19c3cd8f1a821.jpeg" data-gid="gid://syiq/Photo/396746">“On some yachts, the heli hangars are no longer actively used and instead function as static storage platforms,” reveals van der Ploeg. “In such cases, owners may even suspend servicing altogether – an illustration of how operational reality can diverge from original design intent.”Developments in control systems are being matched by advances in data intelligence. During the COVID period, <a data-gid="gid://syiq/Company/5438" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Akerboom Yacht Equipment (Company)">Akerboom</a> expanded its remote-support capabilities and identified a recurring issue: when faults occur, crews often cannot describe what happened beyond “pressing the button”. To address this, its latest systems incorporate data logging that records each operating cycle, sequence order, timing, load condition and fault event with precise timestamps.“When an issue arises, engineers can trace it back to the exact operating condition that caused it,” explains van der Ploeg. “While still being rolled out primarily on new-build projects, data logging represents a shift towards evidence-based rather than purely scheduled maintenance.”Across <a data-gid="gid://syiq/Company/5438" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Akerboom Yacht Equipment (Company)">Akerboom</a>’s predominantly hydraulic product range, failures rarely originate in the actuators themselves. Instead, the most vulnerable areas are where forces converge – locations where multiple loads are transferred into a single structural interface. Passerelles are a prime example:“Forces are transmitted through long, slender structures back to a limited number of mounting points,” explains van der Ploeg. “When additional functionality is introduced, such as lateral slewing rather than straight-line deployment, those forces increase substantially.”<img src="https://photo-assets.superyachttimes.com/photo/396750/image/large-74a75f9786460908e4bf98d749448420.png" data-gid="gid://syiq/Photo/396750">Bonding and bolt-inSome <a data-gid="gid://syiq/Company/5438" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Akerboom Yacht Equipment (Company)">Akerboom</a> passerelles now extend up to 16-metres in length, pushing the limits of lightweight structural engineering while maintaining stiffness, safety margins and regulatory compliance. Designing these interfaces requires careful attention to geometry, material thickness and fatigue behaviour.Marine-grade aluminium remains the primary structural material, selected for its high strength-to-weight ratio and corrosion resistance. Steel is used selectively in high-load interfaces where stiffness and wear resistance are critical. Carbon fibre has also been deployed strategically, particularly in the outermost sections of passerelles. Reducing mass at the extremity lowers bending moments throughout the structure, enabling greater reach without adding reinforcements.&nbsp;A more recent addition to <a data-gid="gid://syiq/Company/5438" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Akerboom Yacht Equipment (Company)">Akerboom</a>’s fabrication methodology is the introduction of structural adhesive bonding. In lightweight aluminium constructions, particularly passerelles, welding thin sections sometimes caused unacceptable deformation due to heat input. To address this, <a data-gid="gid://syiq/Company/5438" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Akerboom Yacht Equipment (Company)">Akerboom</a> now uses a hybrid method: components are positioned with bolts to prevent movement, while the structural adhesive provides the primary load-bearing bond. In this configuration, the bolts act purely as locators and the adhesive carries the load.Another key evolution is the move towards bolt-in housings for boarding equipment such as passerelles and swim ladders. Historically, these housings were built directly into the hull, placing installation and testing squarely on the shipyard’s critical path. This new approach uses self-contained housings that are assembled and factory-tested in-house, accepted by owners or representatives, and installed later as plug-and-play units.“Once delivered, the housing is bolted into place, hydraulics and electrics are connected, and functionality is assured – eliminating the risk of delays, rework and repainting,” says van der Ploeg.<img src="https://photo-assets.superyachttimes.com/photo/396752/image/large-1ea3884318d73cd6441f8d9cf8801f9c.jpg" data-gid="gid://syiq/Photo/396752">Breaking outSolely owned by <a data-gid="gid://syiq/Company/4951" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Koninklijke De Vries Scheepsbouw (Company)">Koninklijke De Vries,</a> until recently <a data-gid="gid://syiq/Company/5438" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Akerboom Yacht Equipment (Company)">Akerboom</a> worked exclusively within <a data-gid="gid://syiq/Company/29" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Feadship (Company)">Feadship</a>. It is now pursuing a more open strategy, with roughly 60% of turnover derived from <a data-gid="gid://syiq/Company/29" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Feadship (Company)">Feadship</a> new-build projects, 25% from service and refit work on existing <a data-gid="gid://syiq/Company/29" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Feadship (Company)">Feadships</a>, and the rest from other shipyards – a share that continues to grow as the company expands its marketing network.An early major non-<a data-gid="gid://syiq/Company/29" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Feadship (Company)">Feadship</a> contract was with <a data-gid="gid://syiq/Company/4644" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="AKYACHT (Company)">AKYACHT</a> in Turkey for its 120-metre-plus project (NB012) due for delivery in 2030. Another is the new <a data-gid="gid://syiq/Company/201" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="ISA Yachts (Company)">ISA</a> Custom 80 currently under construction at <a data-gid="gid://syiq/Company/201" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="ISA Yachts (Company)">ISA Yachts</a> in Ancona. The <a data-gid="gid://syiq/Company/201" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="ISA Yachts (Company)">ISA</a> client, an experienced <a data-gid="gid://syiq/Company/29" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Feadship (Company)">Feadship</a> charterer, specified <a data-gid="gid://syiq/Company/5438" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Akerboom Yacht Equipment (Company)">Akerboom</a> to supply the boarding systems with which he directly interacts – in total, five independent mechanical systems with fully integrated control logic.<img src="https://photo-assets.superyachttimes.com/photo/396754/image/large-0eae94a6e941a08764d18f82632bee1f.jpg" data-gid="gid://syiq/Photo/396754">Across all these developments, a clear evolution emerges. <a data-gid="gid://syiq/Company/5438" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Akerboom Yacht Equipment (Company)">Akerboom</a> has progressed from boatbuilder to specialist supplier, system integrator and, ultimately, lifestyle collaborator. Each project begins by asking what experience the owner, designer or shipyard wants to achieve. From there, complexity is carefully analysed and engineered so that systems are notable precisely for their absence – seeming to disappear once installed, leaving spaces that feel more open, intuitive and fully resolved.<img src="https://photo-assets.superyachttimes.com/photo/396753/image/large-24074ca4b4f597fe6f6d7ba61d16b96a.jpg" data-gid="gid://syiq/Photo/396753">

Standardising the bespoke: The engineering behind custom superyacht equipment

Akerboom Yacht Equipment explains how modular engineering is reshaping its custom superyacht boarding systems, platforms, cranes and control systems.

Project YB256 is a 45-metre steel and aluminium motor yacht under construction at <a data-gid="gid://syiq/Company/40" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Royal Hakvoort Shipyard (Company)">Royal Hakvoort Shipyard</a> in the Netherlands. The first collaboration between the family-run yard and <a data-gid="gid://syiq/Company/33" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Hoek Design Naval Architects B.V. (Company)">Hoek Design Naval Architects</a>, the yacht’s retro styling masks a modern and highly capable cruiser engineered for long-distance voyaging.<img src="https://photo-assets.superyachttimes.com/photo/396216/image/large-6096248c4df8137326bee068ed36838f.jpg" data-gid="gid://syiq/Photo/396216">The impossibly picturesque village of Monnickendam on the western shore of the Markermeer, a vast freshwater reservoir not far from Amsterdam, has been home to the <a data-gid="gid://syiq/Company/40" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Royal Hakvoort Shipyard (Company)">Royal Hakvoort Shipyard</a> for more than a century. Wedged into a narrow strip of dockland between the old town centre and the water’s edge, space is as precious as the custom yachts it builds, but over the years the management has perfected a choreography of space and timing to ensure multiple projects can progress without tripping over one another.“<a data-gid="gid://syiq/Company/33" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Hoek Design Naval Architects B.V. (Company)">Hoek Design</a> is just a few kilometres down the road and we’ve often wanted to work with them, but the stars never aligned,” affirms Klaas Hakvoort, fourth generation director of the shipyard with his brother Albert Jr. “In this case, the client wanted Dutch pedigree, was happy with our pricing, and the complexity of the project was a perfect match for a custom builder like us.”<img src="https://photo-assets.superyachttimes.com/photo/396206/image/large-71da8891dd01ddb5eed6ecc0455c82e1.jpg" data-gid="gid://syiq/Photo/396206">Project YB256 was inspired by <a data-gid="gid://syiq/Yacht/6037" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Blue II55.99m (183'8&quot;)Turquoise Yachts2020">Blue II</a>, the 56-metre expedition vessel with classic lines by <a data-gid="gid://syiq/Company/33" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Hoek Design Naval Architects B.V. (Company)">Hoek Design</a> launched by <a data-gid="gid://syiq/Company/224" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Turquoise Yachts (Company)">Turquoise Yachts</a> in 2020. <a data-gid="gid://syiq/Company/33" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Hoek Design Naval Architects B.V. (Company)">Hoek Design</a> partners Andre Hoek and Ruurt Meulemans translated the client’s admiration for the retro-influenced yacht into a more compact platform that would echo the same timeless elegance free of nostalgic mimicry, while embracing modern technology and efficiency. The owner’s exacting brief included full wheelchair accessibility, an elevator connecting all deck levels, and transatlantic capability.“The hull and superstructure were conceived to balance classic proportions with today’s efficient hydrodynamics,” says Ruurt Meulemans. “Computational fluid dynamics [CFD] analysis informed every curve, refining the bow shape and optimising volume distribution to reduce resistance as much as possible and improve wake flow to the twin propellers. The objective was a smooth, efficient ride across a transatlantic cruising envelope of close to 4,000 nautical miles – no small achievement for a vessel under 400 gross tons.“<img src="https://photo-assets.superyachttimes.com/photo/396218/image/large-f219694742e3fedf1f00ff2c0b5c4003.jpg" data-gid="gid://syiq/Photo/396218">Meeting these requirements called for some clever engineering based on robust, proven solutions. Finite element analysis (FEA) guided the placement of bulkheads, stringers, and the keel to ensure structural integrity under long passages without compromising interior volume. The challenge was compounded by hybrid-assisted propulsion comprising twin 1,000-hp MAN diesel engines paired with electric motors and supported by a lithium-ion battery bank.The system integrated by <a data-gid="gid://syiq/Company/3869" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Eekels Technology BV (Company)">Eekels Technology</a> allows for flexible operational modes. Electric mode provides a few hours of silent propulsion at low speed, ideal for manoeuvring in harbours or environmentally sensitive zones. In diesel mode the electric motors can function as shaft generators to reduce fuel burn on extended passages. The electric motors also add redundancy for additional peace of mind far from home. <a data-gid="gid://syiq/Company/40" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Royal Hakvoort Shipyard (Company)">Royal Hakvoort</a> had direct experience of the latter: during sea trials of 61-metre <a data-gid="gid://syiq/Yacht/8621" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Asia61.0m (200'2&quot;)Royal Hakvoort Shipyard2024">Asia</a>, an electrical fault caused an engine shutdown, but the gearbox-mounted e-motors allowed the crew to manoeuvre safely away from an offshore wind farm.<img src="https://photo-assets.superyachttimes.com/photo/396210/image/large-bfbd4613c1cb6d84c9fb37fa9b5d37a0.jpg" data-gid="gid://syiq/Photo/396210">The battle for spaceA signature feature of the yacht is the continuous ribbon of wraparound glazing on the main and bridge decks – 17 tonnes of it. The bulwarks are also glass and the hull windows incorporate a dot-fade pattern that blends with the white hull from a distance. Combined with the classic sheer line and bronze-metallic funnel, the green-tinted glass adds a touch of understated elegance that hints at an era that never quite existed – but should have. The wheelhouse windows are not full-height, but the aluminium surfaces beneath will be clad with glass and the same green reflective finish to create the visual effect of uninterrupted glass.&nbsp;Extensive glazing has a downside, however: heat. Solar load becomes a critical issue, especially for a yacht destined for hot climates. One option is to increase HVAC capacity, but a smarter one is to engineer better insulation. <a data-gid="gid://syiq/Company/40" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Royal Hakvoort Shipyard (Company)">Hakvoort</a> chose the latter. A two-year development programme with glass specialist Royal-Maritiem sought the ideal balance of solar control, privacy, clarity, structural strength, and colour uniformity. Each double-glazed laminated pane is filled with argon gas and coated with a low-emissivity metal film tuned to deliver the desired green tint. The result is a 50 precent reduction in heat transfer compared to conventional marine glass.<img src="https://photo-assets.superyachttimes.com/photo/396219/image/large-043a6cfbb4c2ee18f77e9eca62c4d295.jpg" data-gid="gid://syiq/Photo/396219">But heat is not the only issue. Full-height windows also eliminate the storage units and hidden cavities normally used to route ducting, wiring, and AC trunking, pushing the technical infrastructure inward. As a result, space became the defining constraint and the build team had to fight for every cubic centimetre. <a data-gid="gid://syiq/Company/33" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Hoek Design Naval Architects B.V. (Company)">Hoek Design</a> has deep experience of designing sailboats where space is always at a premium, but it was up to the shipyard to find ways to integrate complex systems into tight envelopes.“Nothing fitted, so we had to make it fit,” says Klaas, which could be the unofficial motto of the project. “By the time everything is installed, the engine room will be very full, but accessible and maintainable. Not cluttered – engineered.”The electrical switchboards span the full height of the engine from port to starboard across, an unavoidable result of the hybrid system. The engine room itself relies on seawater-fed heat exchangers because there wasn’t room for conventional air-cooling systems. The pool doubles as a tender bay with a dump tank and its own dedicated crane compartment that closes flush with the teak deck. Under the sunbed on the foredeck is a two-storey garage for the crew tender and a pair of PWCs. Add the elevator, wider side decks and interior passages sized for wheelchair access, and every available every void had to serve a purpose.<img src="https://photo-assets.superyachttimes.com/photo/396209/image/large-486995c89e482f3860ee5f1204771fb6.jpg" data-gid="gid://syiq/Photo/396209">Hidden in plain sightThe metallic bronze faux funnel is more than a charming styling cue; it also highlights the kind of engineering concealment that defines the whole project. Since the yacht has underwater exhausts, there was no need for a traditional dry stack – nor was there space to route ducting up to one. Instead, the funnel became the home of the fresh-air unit that draws in and purifies outside air for the HVAC system. Fitting it inside that tight volume meant some early design assumptions had to be reworked.&nbsp;Routing the air quietly around the yacht from high up in the vessel posed further challenges. The onboard noise targets are uncompromising and the owner’s suite is engineered for a harbour maximum of 44 decibels, although <a data-gid="gid://syiq/Company/40" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Royal Hakvoort Shipyard (Company)">Hakvoort</a> typically achieves lower. Underway, the expected levels sit in the low 50s – quiet enough that the only audible sound should be the soft splash of water along the hull. Modern superyachts achieve such low mechanical noise levels that airflow has become the primary acoustic concern, not the engines or generators.<img src="https://photo-assets.superyachttimes.com/photo/396212/image/large-a2aeb88e2ca030f7dc36a4bed74abb21.jpg" data-gid="gid://syiq/Photo/396212">“You won’t hear machinery these days – you’ll hear air moving through the ducting,” confirms Klaas. “That’s why we focus obsessively on silencing ducts, bends and terminations.”Consider the HVAC ducting for the crew quarters. To reach the lower deck forward, it has to pass under the bed in the owner’s stateroom, negotiating several dog-leg bends in the process. Air accelerates noisily through tight turns due to mass conservation and pressure shifts, so the yard routinely uses flexible elbow sections with larger diameters and internal damping to reduce turbulence and suppress sound. <img src="https://photo-assets.superyachttimes.com/photo/396214/image/large-892daf254a9606fb0d0d5fed5e58dda4.jpg" data-gid="gid://syiq/Photo/396214">Elegance with an edgeThe aluminium superstructure was built at <a data-gid="gid://syiq/Company/5231" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Alu-bouw Fryslân BV (Company)">Alubouw Fryslan</a> in Franeker and joined to the steel hull at Buijs Shipyard – the hull builder – before being towed to Monnickendam, but <a data-gid="gid://syiq/Company/40" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Royal Hakvoort Shipyard (Company)">Royal Hakvoort</a> has its own joinery division and stainless-steel department that produce most of the fixed furniture and deck hardware in-house. Klaas points out the custom-engineered hinges used for the exterior doors as an example of the shipyard’s hands-on approach. During development, these hinges were tested in the most practical way imaginable: by suspending 40 kg weights to a toilet door heavily used by shop-floor workers. Any weaknesses that surfaced were corrected before installation.&nbsp;Another example is the aluminium hull platform that folds out from the topsides amidships and connects to the main deck by way of a boarding ladder for tender access. The platform being assembled in the metalworking department uses a hydraulic rotary or slew drive – more compact than conventional rams and able to generate high torque in tight spaces, it is a solution that has been refined by <a data-gid="gid://syiq/Company/40" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Royal Hakvoort Shipyard (Company)">Royal Hakvoort</a> over years of building canoe-stern vessels.<img src="https://photo-assets.superyachttimes.com/photo/396211/image/large-9d9af2d4a7ba3a495473f7ac81ad923c.jpg" data-gid="gid://syiq/Photo/396211">Although capable of crossing the Atlantic, YB256 will primarily be used for short, comfortable runs with the frequent returns to port and high hospitality demands typical of most operational profiles. Every aspect of the interior has been conceived with wheelchair accessibility in mind, including a transformer-style platform in the stern. Guest and crew flows remain fully separated, which is not always the case on yachts of this size. The lower deck houses two full-beam VIP suites arranged around the main lobby and elevator; a third space will be used as an office/gym with a built-in recess for a running machine. The bridge deck is reserved for the owner’s sky lounge, while the captain’s cabin has been relocated to the lower deck. Crew areas have been configured to maximise discretion and operational efficiency with service and storage areas scaled to support day-use cruising.After touring the shipyard and the yacht, the lasting impression is that YB256 is not just a modern yacht in retro clothing. It is a study in constraint-driven design and smart engineering by a shipyard for whom “custom” is a vocation, not a marketing term. Its timeless elegance is more than skin deep, the result of many difficult decisions made in the belief that contemporary and classic can comfortably coexist – both in appearance and in engineering.<img src="https://photo-assets.superyachttimes.com/photo/396220/image/large-95656d748cc09cc4e461acdaecb835d0.jpg" data-gid="gid://syiq/Photo/396220">

Inside the build of a 45m Royal Hakvoort superyacht

Inside Royal Hakvoort's Project YB256, in collaboration with Hoek Design.

<a data-gid="gid://syiq/Company/2027" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Castoldi S.p.A. (Company)">Castoldi</a>&nbsp;is both a leader in the field of waterjet technology and a point of reference for serial production tenders. Active across the military, commercial, and superyacht sectors, the Italian brand is now applying its propulsion and manufacturing know-how to the specialist market for limousine tenders.<img src="https://photo-assets.superyachttimes.com/photo/396631/image/large-062ebf001bce4c2cc3c7a9d7b4ad2e91.jpg" data-gid="gid://syiq/Photo/396631">The small town of Albairate in landlocked Lombardy might seem a strange place for a boatbuilder to set up shop, but it is closely linked to the brand’s origins in one of Italy’s richest agricultural regions. Luigi Castoldi was a pioneering engineer in the agricultural machinery sector through his company BCS, which is still extant today. He began exploring waterjet propulsion – still a novelty in the early 1960s – because boats were damaging their propellers on the shallow bottom of the nearby River Ticino.&nbsp;After importing a waterjet drive, he set about re-engineering it to create a more durable and effective design. His first mass-produced <a data-gid="gid://syiq/Company/2027" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Castoldi S.p.A. (Company)">Castoldi</a> waterjet, model Jet 05, made its debut at the 1969 Genoa Boat Show. Since then, over 40,000 <a data-gid="gid://syiq/Company/2027" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Castoldi S.p.A. (Company)">Castoldi</a> waterjets have been delivered around the world, from the compact 224 unit up to the mighty 600 HCT drive that can support installed power of up to 2,700 horsepower.<img src="https://photo-assets.superyachttimes.com/photo/396632/image/large-4d83f3db58d65cf02a38baa8d387c061.jpg" data-gid="gid://syiq/Photo/396632">Today, the company is still family-owned under the directorship of Giacomo Castoldi, Luigi’s grandson, who with his father Franco spearheaded the company’s diversification into the tender market with its own range of diesel-powered jet tenders. The first model, the JT 18 Pro in 1998, served as the blueprint for the current range, from the entry-level Jet Tender 14 up to the 10.5-metre Jet Tender 34. The latter also provides the technical platform for the Jet Tender 34 Limo, the company’s first venture into the limousine market.Why waterjetsWaterjet propulsion for superyacht tenders offers several advantages over traditional propeller-based systems. These include enhanced manoeuvrability, higher efficiency and durability, lower noise and vibration, and the reversing bucket can ‘crash stop’ a boat in less than twice its own length. But arguably the most critical feature – as Luigi Castoldi was quick to realise – is shallow draft.<img src="https://photo-assets.superyachttimes.com/photo/396635/image/large-accb3204fb1c42a0f2bfa16fdfac9f5c.jpg" data-gid="gid://syiq/Photo/396635">“Jet tenders can drive right up to a beach, and most of our models are equipped with bow ramps as standard,” says Giacomo Castoldi. “Combined with a folding console, low draft also means they occupy less vertical space inside the tender garage, while the lack of exposed propeller blades reduces the potential for injury to swimmers, divers, or marine life.”Over the years, <a data-gid="gid://syiq/Company/2027" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Castoldi S.p.A. (Company)">Castoldi</a> has finessed its waterjet technology. Unlike other systems requiring external gearboxes, all <a data-gid="gid://syiq/Company/2027" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Castoldi S.p.A. (Company)">Castoldi</a> waterjets except the entry-level Turbodrive 224 DD have integrated gearboxes. This results in a more compact overall footprint, which means more space for passengers and luggage storage, and simplifies the installation process while reducing the potential for errors or rework. They are also equipped with a patented anti-clogging system that enhances the waterjet’s reliability in challenging conditions. The Clear-Duct unclogging system works by reversing the direction of the impeller and simultaneously opening the protective intake grid to flush out any debris that may have accumulated.<img src="https://photo-assets.superyachttimes.com/photo/396660/image/large-44d8926e35b1304d60e5cdbcb14c3137.jpg" data-gid="gid://syiq/Photo/396660"><a data-gid="gid://syiq/Company/2027" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Castoldi S.p.A. (Company)">Castoldi</a>’s latest waterjet drives that carry the HCT acronym have been redesigned to offer a 12% increase in performance compared to previous iterations. Advancements in impeller design, a pre-stator vane system, and an updated post-impeller stator work together to improve the flow of water through the system, reduce cavitation, and ultimately deliver more thrust combined with lower fuel consumption.&nbsp;“These enhancements are largely thanks to investment in CFD analysis,” says Giacomo, “Combining fluid dynamics with our own practical engineering know-how has generated a lot of new ideas."<img src="https://photo-assets.superyachttimes.com/photo/396615/image/large-28e2be0f5dedca48b4f2f92405172d02.jpg" data-gid="gid://syiq/Photo/396615">Total control<a data-gid="gid://syiq/Company/2027" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Castoldi S.p.A. (Company)">Castoldi</a> also produces its own control systems, from simple mechanical options to the sophisticated ACES system developed in collaboration with <a data-gid="gid://syiq/Company/7877" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Xenta (Company)">Xenta</a>. Powered by a 32-bit embedded processor and utilising a proprietary CAN bus network protocol, the ACES system delivers precision control of engine RPM, waterjet steering nozzles and reversing buckets when transitioning between docking and cruising modes. Additional functions include dynamic positioning and smart anchoring, which simulates mechanical anchoring by swinging around a virtual GPS point. Adaptive steering logic can even provide ‘propeller mode,’ which recognises when the vessel is in reverse to simulate conventional propeller behaviour – a useful feature for operators transitioning to waterjets.To maintain quality control, most of the waterjet components are machined in-house, an exception being the Duplex stainless-steel impellers that rely on precision investment casting technology. With regard to tender production, the whole process – from the 3D design, hull lamination and tube fabrication to the hydraulic and electrical systems – is carried out internally before final testing in its own water basin in front of the factory.<img src="https://photo-assets.superyachttimes.com/photo/396658/image/large-b3c15147d7d49ce31a9b749e8a305ff2.jpg" data-gid="gid://syiq/Photo/396658">When <a data-gid="gid://syiq/Company/2027" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Castoldi S.p.A. (Company)">Castoldi</a> began production of jet tenders in the mid-90s, it decided from the start to take a platform-based approach with fixed hull forms designed around its own propulsion system. By standardising the production process, <a data-gid="gid://syiq/Company/2027" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Castoldi S.p.A. (Company)">Castoldi</a> ensures consistent quality while reducing unit costs through repeated tooling and manufacturing processes. Additionally, serial production provides opportunities for continuous optimisation, further enhancing the performance and quality of each new upgraded model. As the range evolved, customised interior materials, finishes and layouts have become the norm to meet the specific needs of individual clients without having to build costly and time-consuming one-offs.&nbsp;The company has applied exactly the same production philosophy to its new Jet Tender 34 Limo designed by <a data-gid="gid://syiq/Company/153" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Nauta Yachts S.r.l. (Company)">Nauta Design</a>. Conceived initially for a fleet of luxury cruise ships currently under construction, each ship will carry four <a data-gid="gid://syiq/Company/2027" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Castoldi S.p.A. (Company)">Castoldi</a> Jet Tender 34 Limo tenders to deliver a sophisticated ship-to-shore guest experience.<img src="https://photo-assets.superyachttimes.com/photo/396657/image/large-a20e0e70cb5a086260c495f6e811d4a1.jpg" data-gid="gid://syiq/Photo/396657">Limo luxury&nbsp;Historically, the limousine tender segment has been defined by high levels of customisation, where each unit is tailored specifically to the design and needs of a particular superyacht. While this approach allows for alignment with the mothership’s aesthetic, it often results in longer lead times, higher costs, and compromises in terms of performance and systems integration. <img src="https://photo-assets.superyachttimes.com/photo/396633/image/large-bb3ca9a1c828124e6a74dc5b67525448.jpg" data-gid="gid://syiq/Photo/396633"><a data-gid="gid://syiq/Company/2027" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Castoldi S.p.A. (Company)">Castoldi</a>’s entry into this market introduces a shift toward standardised, platform-based design, which allows for quicker production times and greater system optimisation, while still providing owners with a high degree of personalisation, particularly in the interior architecture. Two primary interior layouts are offered: one with all-seated configurations for maximum comfort, and another combining seating with a pantry and bathroom for longer transfers. Material finishes can also be tailored to suit individual preferences."This project represents a new chapter for <a data-gid="gid://syiq/Company/2027" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Castoldi S.p.A. (Company)">Castoldi</a> that expands our offerings to new markets, while maintaining the commitment to innovation, quality, and luxury we are known for,” says Giacomo. “The opportunity arose to enter the limousine tender market with a semi-serial product that embodies our construction philosophy of creating optimised vessels rather than one-offs.”<img src="https://photo-assets.superyachttimes.com/photo/396625/image/large-24bbf67840c4bba049f3423e568ddbaa.jpg" data-gid="gid://syiq/Photo/396625">“In practical terms, we estimate that our serial-produced limousine tenders are priced at least 35% lower than equivalent full-custom examples,” adds <a data-gid="gid://syiq/Company/2027" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Castoldi S.p.A. (Company)">Castoldi</a>’s commercial director Luca Taccani, “without sacrificing the luxurious finish or technical sophistication that clients expect.”In addition to the four limo tenders, <a data-gid="gid://syiq/Company/2027" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Castoldi S.p.A. (Company)">Castoldi</a> is also supplying the cruise ships with two customised Jet Tender 28 SV units. The ‘SV’ stands for ‘Support Vessel,’ and the model is specifically designed to work in tandem with the limousine tenders, with an enhanced bow sun-pad, extensive storage, pantry, and premium features like a T-top.<img src="https://photo-assets.superyachttimes.com/photo/396622/image/large-6c33afd5ceeb462bb96cd2592a9fa250.jpg" data-gid="gid://syiq/Photo/396622">The flywheel effect&nbsp;As <a data-gid="gid://syiq/Company/2027" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Castoldi S.p.A. (Company)">Castoldi</a> has expanded its offerings and capabilities, its workforce has grown accordingly and is now nearing 100 direct employees. In terms of business performance, the company has seen consistent growth, especially over the past two years since Luca Taccani joined the company. Annual turnover is currently distributed fairly equally across the waterjet and tender markets (50% and 40% respectively) with the remainder from spare parts and commissioning activities.&nbsp;Although <a data-gid="gid://syiq/Company/2027" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Castoldi S.p.A. (Company)">Castoldi</a> builds its tenders in series, each sale is essentially a one-off transaction with an end client. Its propulsion products, on the other hand, can generate recurring clients that expect reliable and ongoing service. Naval procurement involving multiple waterjet units is an expanding sector for the company, for example. To meet this demand, <a data-gid="gid://syiq/Company/2027" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Castoldi S.p.A. (Company)">Castoldi</a> has made a deliberate effort to ensure the availability of components, stocking spare parts for older models well beyond customary timelines – often for more than ten years.“We’ve focused strongly on spare parts and after-sales support with dedicated back-office staff for service management,” says Luca Taccani. “This long-term outlook not only boosts customer loyalty but has also proven financially advantageous. As raw material costs have risen sharply, having a ready stock of components means we’ve been able to avoid significant cost increases.”<a data-gid="gid://syiq/Company/2027" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Castoldi S.p.A. (Company)">Castoldi</a>’s trajectory over the past few years reflects a competitive company that is expanding its product range while also refining its operational efficiency and service capabilities. By focusing on technical innovation and long-term service, it has effectively created a “flywheel” effect, whereby small but consistent wins build momentum over time in a self-sustaining cycle of growth. Moreover, the brand’s entry into the limo tender market aims to demonstrate how serial production methodologies, when combined with proprietary propulsion and rigorous quality control, can challenge the prevailing bespoke approach.<img src="https://photo-assets.superyachttimes.com/photo/396659/image/large-9f4ecad812d4f5c94c3664909275b1d8.jpg" data-gid="gid://syiq/Photo/396659">

The landlocked yard building limousine tenders

Castoldi is entering the limousine tender market with the Jet Tender 34 Limo, combining waterjet technology with a serial-production approach.

As the yachting industry begins to take alternative fuels seriously, Heikki Bergman, CEO and design manager of start-up company <a data-gid="gid://syiq/Company/8768" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Propulsion House (Company)">Propulsion House</a>, is several steps ahead. His company has developed a compact, modular methanol-electric propulsion system for yachts up to 70 metres that challenges the big marine technology brands.<img src="https://photo-assets.superyachttimes.com/photo/390298/image/large-6f876876617a86ea1297b4c7d5007042.jpg" data-gid="gid://syiq/Photo/390298">Drawing on more than two decades of experience in marine electrical propulsion, Heikki Bergman brings an engineering-driven approach to hybrid systems, with a sharp focus on real-world viability, space efficiency, and the practical constraints of small and mid-size vessels.“There’s good will in the market,” he says, “but not many customers or shipyards truly understand what they’re buying when it comes to electric or alternative-fuel systems. That’s where things often fall apart.”Now, Bergman and his team have unveiled a hybrid system he claims is capable of delivering over 5,000 nautical miles of range using methanol reformers, hydrogen fuel cells, batteries, and lightweight electric pod propulsion – all within the general arrangement footprint of an existing 45-metre, steel-hulled explorer hull designed by Frank Neubelt.<img src="https://photo-assets.superyachttimes.com/photo/390299/image/large-087f0ae7e1a2668b35e761bf7c22a0db.jpg" data-gid="gid://syiq/Photo/390299">Scaling downBergman’s journey began at <a data-gid="gid://syiq/Company/6143" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="ABB Group (Company)">ABB</a>, the Finnish leader in electrification and automation technology, where he worked on large commercial projects across Europe, particularly in the passenger vessel segment. In 2015, he identified a knowledge gap in the smaller vessel markets: while electrical and hybrid systems were becoming standard on larger ships, few people understood how to scale them down effectively for smaller yachts.&nbsp;"The big players don’t cater well to anything below 1 megawatt per propeller," he explains. "They come with massive project organisations and million-euro tickets, which just doesn’t work for yachts below 70 metres. We start from seven horsepower, up to 600 kilowatt."He founded <a data-gid="gid://syiq/Company/8768" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Propulsion House (Company)">Propulsion House</a> in 2017 as a consultancy, but it quickly evolved into a product development company. The firm now works across multiple sectors – including oil and gas – but yachting remains a core focus. The team doubled in size last year and is expected to grow again in 2026.<img src="https://photo-assets.superyachttimes.com/photo/390300/image/large-701d98e76c4b8100d4437b449c0de308.jpg" data-gid="gid://syiq/Photo/390300">Time to RethinkThe in-house propulsion system is a methanol-electric hybrid setup using the existing 45-metre explorer hull as a baseline that began with the team asking a simple but critical question: could a vessel of this size achieve 5,000 nautical miles of range using alternative fuels, without compromising usable interior volume? The answer: Yes, by completely rethinking how propulsion integrates with vessel design.At the heart of the system is the trademarked DeeCee Microgrid – a methanol-fuel-cell architecture designed for endurance, redundancy and modular installation. The system includes: six methanol reformers, which convert a methanol/water mixture into hydrogen and CO₂; six 200 kilowatt hydrogen fuel cells, fed by the reformers to generate electricity; and two 600 kilowatt battery banks, offering load balancing, peak shaving, and full-electric operation in port or during silent cruising.<img src="https://photo-assets.superyachttimes.com/photo/390301/image/large-09f5baddc586600638d912e42f93dd0f.png" data-gid="gid://syiq/Photo/390301">All the system components – fuel cells, batteries, converters – are already commercially available. Combined, they enable propulsion via two 600 kilowatt electric pods, with no shaft lines or central switchboards. Instead, the vessel uses a distributed DC network through localised electrical control units – each managing its zone independently and able to switch within milliseconds in case of blackout.“We’ve eliminated the need for a switchboard room altogether,” says Bergman. “This frees up interior volume, reduces cabling, and improves safety and redundancy.”The reforming process produces a controlled volume of CO₂, which the system can capture and store onboard for recycling. The volume of this captured CO₂ is significantly lower than from internal combustion engines – about 40-60 percent less than a diesel generator. Moreover, when taking into production methods of green methanol and e-methanol, some of which actually consume CO2 rather than release it into the air, the overall CO2 emission reduction is even higher.<img src="https://photo-assets.superyachttimes.com/photo/390305/image/large-8b7413485de1c405fa96aac8b215fe00.jpg" data-gid="gid://syiq/Photo/390305">Small, Light &amp; SmartPerhaps the most radical part of the concept is the proprietary Pulling-e Propulsion pod design. It resembles a torpedo: long, narrow, and hollow, with a stationary internal body, an outer rotating propeller shell and a 2-bladed propeller offering a good balance of efficiency and drag. Containing a permanent magnet synchronous motor and scalable from 7-600 kilowatt per propeller, there is no shaft, no gearbox, and minimal mechanical complexity. The pod can be steerable for shallow water use, or fixed with a rudder integrated into the strut that connects it to the hull.&nbsp;The unit is designed to be modular and installation-agnostic. It can be fixed horizontally to the hull, retrofitted into an old rudder socket, or even fitted with lift-enhancing struts to improve hydrodynamic flow. Unlike traditional azimuthing thrusters, which rotate 360 degrees, the pods limit steering angles but compensates via bi-directional rotation. The result is full-vector thrust control, achieved with a simpler, lighter system.<img src="https://photo-assets.superyachttimes.com/photo/390304/image/large-1e7154665ec390b5c89b7ed5b892f2e1.jpg" data-gid="gid://syiq/Photo/390304">This method also benefits noise reduction. The methanol-electric propulsion is already quiet, so the remaining main source of noise is from propeller-generated pressure pulses hitting the hull. The propellers, positioned far aft as far outboard as possible away from the hull, significantly reduce this underwater radiated noise—a growing concern for marine ecosystems.The concept isn’t just theoretical. Cambridge University’s Energy boat challenge team recognised the potential and <a data-gid="gid://syiq/Company/8768" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Propulsion House (Company)">Propulsion House</a> has been working with Marin’s top designers on the propeller optimisation, using a 15-kilowatt test unit to refine efficiency. The propellers were optimised using PropArt and PROCAL computations. A speed-power prediction based on the resistance was provided, and additional analysis was carried out in terms of steering forces and cavitation behaviour.<img src="https://photo-assets.superyachttimes.com/photo/390303/image/large-fe5f36bdbe69c88da2bda09491ac7329.png" data-gid="gid://syiq/Photo/390303">“We achieved 89 percent propeller efficiency – among the highest on the market,” says Bergman. “And when we scale up to the size used on yachts, efficiency actually increases due to the larger central hole in the propeller. And that’s just the first iteration available.”The system is also suited for retrofits. In theory at least, shaft lines could be removed entirely and the new propulsion unit installed into the existing rudder sockets, reducing the need for invasive hull perforations. The structural load is carried in a way similar to rudder mechanics, with reinforcement achieved by increasing material thickness inside the torpedo's cooling pipe. <img src="https://photo-assets.superyachttimes.com/photo/390302/image/large-279388f3d090554f024470e1514e9ec4.png" data-gid="gid://syiq/Photo/390302">A New Design OrderPerhaps most radical is the company’s approach to vessel design itself. “We start from the underwater section,” Bergman explains. “First the hull, then the propeller location, and then everything else. Not the other way around.”This inverted design process contrasts with the traditional method of selecting off-the-shelf propulsion systems first, which often forces compromises in hull shape, hydrodynamics and interior layout.With partners already on board for further testing in 2026, and interest growing among shipyards and owners, <a data-gid="gid://syiq/Company/8768" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Propulsion House (Company)">Propulsion House</a> is positioning itself not just as a technology provider, but as a strategic design partner. By simplifying systems, reducing space usage, offering real redundancy, and embracing cleaner fuels, Bergman believes a better class of hybrid yacht is not only possible – it’s ready to build. “There’s no fantasy here,” says Bergman. “This could be built tomorrow.”&nbsp;

Heikki Bergman Propulsion House CEO Interview

Propulsion House CEO sites down with SYT to discuss the compact, modular methanol-electric propulsion system for yachts.

Inside the push for methanol-electric yacht propulsion with CEO Heikki Bergman

If home is where the hearth is, then the galley is certainly a fundamental element of any superyacht. Whether enjoying a 10-course taster menu or a teppanyaki treat on deck, food is central to the onboard experience. We take a look at how to avoid second-rate cooking spaces and equipment.When people talk about superyachts, the highlights always seem to revolve around the same things: the beach club, the sundeck, the pool, the master stateroom. The galley barely gets a second thought, until you spend time on board –&nbsp;then the food and its service take centre stage and any issues to do with layout, design or installation become belatedly obvious.Naturally, safety is paramount. Galleys present a host of hazards from deep fryers and steamers to rotating equipment and sharp blades. Fire suppression, hygiene, ventilation, materials, and so on, are governed by classification society rules, but small details like having rounded internal radii instead of sharp corners in stainless steel cabinets help prevent dirt accumulation and make cleaning much easier for galley staff. Ergonomics and design are equally important.<img src="https://photo-assets.superyachttimes.com/photo/394386/image/large-95000aca9788e63f3727ba677f1045e1.jpg" data-gid="gid://syiq/Photo/394386">“The galley layout is defined according to the capacity of the yacht, considering both guests and crew,” says Costanza Pazzi, project architect at <a data-gid="gid://syiq/Company/12" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="CRN (Company)">CRN</a>. “It is usually designed with three clearly distinct areas: washing, cooking, and preparation.”Separate traffic flows for clean and dirty dishes help prevent cross-contamination and accidents. Adequate lighting is a sometimes overlooked consideration, especially for galleys on the lower deck with smaller windows where the artificial lighting should emulate daylight temperatures (4000K-5000K) to show the true colour of the food being prepared.“Each custom superyacht galley is different,” Pazzi continues. “The spaces dedicated to galley and pantries should be discussed as part of the technical specifications at contract completion, with guidelines coming directly from the owner’s team. A fundamental requirement is that ducting and systems need to be defined in the general plans from the outset.”<img src="https://photo-assets.superyachttimes.com/photo/394417/image/large-7799ab22eb4f8b77c27d0e82de2c9dc0.jpg" data-gid="gid://syiq/Photo/394417">Experience counts“The galley is not just one room – it’s an entity,” says Brennan Dates, a chef with more than 25 years’ work experience on superyachts. Currently head chef aboard 87.6-metre <a data-gid="gid://syiq/Yacht/2354" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Project X87.6m (287'5&quot;)Golden Yachts Ltd.2022">Project X</a>, he also consults on galley design through his company <a data-gid="gid://syiq/Company/7686" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Superyacht Galley Designs (Company)">Superyacht Galley Designs</a>. His refit and new-build galley projects includes <a data-gid="gid://syiq/Yacht/234" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Ecstasea85.95m (281'12&quot;)Feadship2004">Ecstasea</a>, <a data-gid="gid://syiq/Yacht/1713" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Mogambo73.51m (241'2&quot;)Nobiskrug2012">Mogambo</a>, <a data-gid="gid://syiq/Yacht/9442" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Dragonfly142.0m (465'11&quot;)Lürssen Yachts2024">Dragonfly</a>, <a data-gid="gid://syiq/Yacht/10316" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Obsidian84.2m (276'3&quot;)Feadship2023">Obsidian</a>, the first <a data-gid="gid://syiq/Yacht/6409" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Moonrise99.9m (327'9&quot;)Feadship2020">Moonrise</a> and second <a data-gid="gid://syiq/Yacht/11108" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Moonrise100.7m (330'5&quot;)Feadship2025">Moonrise</a> yachts, and a 100-metre-plus vessel currently under construction.&nbsp;“Where does the food come into the boat, especially on larger yachts when you’re &nbsp;talking about shell doors and pallets of produce?” he asks. “How does the food get stored, and where is the cold storage located? Which deck is the galley on? Where are the pantries and which decks are the guests eating on? Some food is stored in the galley, then it gets prepped, possibly stored again, then gets heated or reheated, plated and served, and now you’re talking about pantry flow.” <img src="https://photo-assets.superyachttimes.com/photo/394418/image/large-c4c49eab3aaeeb1639265cfacfe9f9ee.jpg" data-gid="gid://syiq/Photo/394418">It’s also important to consider the operational profile of the yacht, because there’s a difference between a purely private yacht and one that’s going to be busy chartering. Is it going to be doing extended cruising to remote locations, which may require bigger dry stores and cold rooms?“I can walk into a galley and within five minutes know if there was a yacht chef involved in the build,” says Dates. “But no one’s really listening to chefs at this point, and I think that negatively impacts on the whole guest experience, but also the crew.”<img src="https://photo-assets.superyachttimes.com/photo/394416/image/large-f89be51556d3eb7510c568074aeb1395.jpg" data-gid="gid://syiq/Photo/394416">One thing for sure is that dumb waiters are mostly a thing of the past, with crews preferring to use the space for additional storage or fridges. Dates further warns against the use of domestic kitchen appliances on board in what are essentially commercial kitchens, where stuff tends to break down much faster. “Rational is the number one in the world for ovens, and MKN is up there,” he advises. “There’s a precipitous drop after those two.”On-deck delightsThese days, the galley is only one centre of chef action on board. There will likely be outdoor cooking stations in the build plan, particularly on charter yachts. <a data-gid="gid://syiq/Company/23" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Lürssen Yachts (Company)">Lürssen</a>’s <a data-gid="gid://syiq/Yacht/6424" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Hadar136.0m (446'2&quot;)Lürssen Yachts2019">Hadar</a>, for example, features an extensive outdoor kitchen on the bridge deck aft, where guests can watch the chef working a wok station, a coal-powered Spanish Josper grill, a rotisserie, and pizza/teppanyaki/tandoori ovens.&nbsp;“At a bare minimum there needs to be a sink and refrigeration, just for basic sanitation,” Dates says. “If you can have a little trash compartment that’s sealed away that’s useful, and then it comes down to equipment – there’s a really good oven by MKN that fits under the counter and which takes care of its own exhaust and accepts standard 535x325 millimetre gastronomic trays.”“There is an ever-increasing demand for the inclusion of pizza ovens, particularly for yachts over 60 metres,” adds Pazzi, “There is also a trend for a table in the main galley where guests have the chance to see the chef working and enjoy a food tasting, aimed at creating a sensory experience.”&nbsp;Open-plan, country kitchen-style layouts are increasingly popular on smaller yachts, and on “galley-up” catamarans where the cooking area become an integral part of family life on board. The <a data-gid="gid://syiq/Company/374" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Sanlorenzo (Company)">Sanlorenzo</a> 64Steel <a data-gid="gid://syiq/Yacht/6178" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Attila64.0m (209'12&quot;)Sanlorenzo2019">Attila</a> even has a custom-made barbecue pit inside the main deck dining area for preparing Argentinian-style steaks. <img src="https://photo-assets.superyachttimes.com/photo/394422/image/large-e484db9dd7caca3e714a505d18be3385.jpg" data-gid="gid://syiq/Photo/394422">Breathing easyAlongside cooking comes the risk of odours, which can quickly infiltrate indoor guest areas if ventilation and extraction aren’t properly designed. During the design of the second <a data-gid="gid://syiq/Yacht/11108" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Moonrise100.7m (330'5&quot;)Feadship2025">Moonrise</a>, for example, the owner requested a taller mast so galley fumes are not blown back onto the sundeck after being vented.&nbsp;&nbsp;The air extraction system in the pro-spec galley aboard the 76.6-metre explorer yacht <a data-gid="gid://syiq/Yacht/4734" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Albatross76.6m (251'4&quot;)Piriou2015">Albatross</a> highlights how smart design can maximise energy efficiency. Extractor fans typically suck the air out of a room, which has to be replaced anew with fresh, treated air. But when the outside temperature is -20°C that could mean firing up another generator just to reheat the air because the galley is in use. On <a data-gid="gid://syiq/Yacht/4734" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Albatross76.6m (251'4&quot;)Piriou2015">Albatross</a>, the cowling above the cooking hobs also creates a curtain of treated air that effectively isolates the cooking area, saving HVAC energy while containing cooking odours and maintaining a constant temperature in the galley. A similar system has been installed on the all-electric sailing yacht Project Zero.<img src="https://photo-assets.superyachttimes.com/photo/394426/image/large-b6d6a20d4c21394ec767a94b34324a08.jpg" data-gid="gid://syiq/Photo/394426">Galley design extends to the handling of waste produce, which includes both garbage and wastewater treatment. The latter is particularly pertinent, because food contaminants and grease can wreak havoc with onboard water treatment systems (this topic is specifically addressed in <a href="https://issuu.com/superyachttimes/docs/how_to_build_it_-_issue_9" rel="noopener noreferrer" target="_blank" title="">Issue 9&nbsp;</a>of How to Build It).&nbsp;“Fat, oil and grease (FOG) need to be separated – this is very important not only for the wastewater treatment process, where they can affect the biological process or clog filters, but also to prevent clogging of pipes,” confirms Georgios Kariofilis, Sales Manager at <a data-gid="gid://syiq/Company/8602" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Hamann AG (Company)">Hamann</a>. “Having a grease trap and a pre-filter system is the first step to avoiding such problems.”Organic trash handling, typically resolved by storing garbage in a refrigerated room or in a deck locker, is also making advances. Dehydration plants, such as those offered by Evac and Eco-Smart, remove water content from food waste by heating it to around 80ºC and evaporating it off as steam. The sterile and odourless residual food waste is roughly 15 to 20 percent of its former volume and can be stored more easily on board for later disposal or composting. Essentially, it means you don’t need as big a trash storage room.<img src="https://photo-assets.superyachttimes.com/photo/394420/image/large-a3eda501d5fdaf6da7497de827b67522.jpg" data-gid="gid://syiq/Photo/394420">Ask an expert&nbsp;The advice from designers and chefs is basically to bring in an expert at the layout stage of design, and to argue for more space rather than less, no matter the size of yacht. Speciality companies like UK-based <a data-gid="gid://syiq/Company/2137" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="GN Espace Galley Solutions Ltd (Company)">GN Espace</a> offer expert advice for superyacht galley layouts and equipment spec, including full commercial galleys and upgrades such as adding a robust powder coated finish to stainless steel doors to match the rest of the yacht.Large or small, yacht designer Guido de Groot argues that the galley is generally in full-time use – especially on charter vessels. He compares the 10 guests plus eight crew aboard the 35-metre <a data-gid="gid://syiq/Company/2948" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Van der Valk Shipyard (Company)">Van der Valk</a> yacht <a data-gid="gid://syiq/Yacht/13018" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Lalabe35.31m (115'10&quot;)Van der Valk Shipyard2025">Lalabe</a> with a 50- or 60-metre vessel that might have 12 guests and 14 crew.“It’s a similar number of guest and crew, so you can’t just halve the size of the galley on the smaller yacht,” he points out. “It requires a lot of smart thinking to get everything into a more compact space.”“Give the galley and associated areas the space they deserve,” insists Dates. “Is luxury jamming the galley in the bottom of the boat and having food travel up four decks, or is it spending resources to have the galley on the main deck nearer to where guests will eat? Because that’s what I would want.”<img src="https://photo-assets.superyachttimes.com/photo/394419/image/large-c9630b9438c0f3772c24b74a369972a1.jpg" data-gid="gid://syiq/Photo/394419">Shipyards looking to streamline the planning process with standardised solutions sometimes argue against bringing in a consultant chef at the design stage. All chefs have their own routines, preferred equipment, likes and dislikes, but individual chefs do not stay with a yacht indefinitely. The galley, on the other hand, will remain for many years, or at least until a major refit. &nbsp;“Not including a superyacht chef in the build is like building a race car and not talking to the driver because they’ll want different buttons in different places,” counters Dates. “It doesn’t make any sense to have someone who’s never done the job be the one to put it all together.”

Why superyacht galley design matters to the onboard experience

How thoughtful superyacht galley design can improve safety, service, storage, ventilation and the wider onboard dining experience.

Galley design: "It's like building a race car without talking to the driver"

Inside Baltic Yachts’ first carbon catamaran build

Inside the build of Zeteo, Baltic Yachts’ first catamaran featuring carbon construction and hybrid propulsion.

Inside the build of 33m Zeteo: Baltic Yachts’ first carbon catamaran

More than a speculative future concept, the AERA catamaran represents the convergence of mature technologies assembled with an emphasis on simplicity and sustainability. Research and testing have shown the project is both feasible and buildable. The focus now is on systems integration and production scaling.<img src="https://photo-assets.superyachttimes.com/photo/371664/image/large-bcc3594f61ee7b5986053ac54a532b0c.jpg" data-gid="gid://syiq/Photo/371664">Developed by <a data-gid="gid://syiq/Company/122" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Royal Huisman (Company)">Royal Huisman</a> in collaboration with sister company <a data-gid="gid://syiq/Company/458" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Rondal B.V. (Company)">Rondal</a>, <a data-gid="gid://syiq/Company/7904" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Artemis Maritime (Company)">Artemis Technologies</a>, and designer <a data-gid="gid://syiq/Company/43" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Cor D. Rover Design (Company)">Cor D Rover</a>, AERA is a technical study into the feasibility of combining wind-dominant propulsion, low-drag hydrodynamics and alternative energy systems within the constraints of a large luxury yacht.&nbsp;The 50-metre catamaran builds on the shipyard’s Project Tidal Shift, an internal innovation initiative that identified increased utilisation of sail power and systemic reductions in energy demand as the most effective pathways towards sustainability. From the outset, the project followed an engineering-first methodology in which energy demand and drag were reduced before alternative energy sources were applied. This approach informed decisions across platform selection, structural engineering, rig design and onboard energy systems.“Early concept development did not initially assume either a multihull platform or a wing sail,” says Herman de Jong, innovation manager at <a data-gid="gid://syiq/Company/122" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Royal Huisman (Company)">Royal Huisman</a>. “Our initial investigations focused on automation of conventional rigs and the use of delivery sails to reduce dependence on costly sail inventories.”Collaboration with <a data-gid="gid://syiq/Company/7904" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Artemis Maritime (Company)">Artemis</a> introduced the possibility of wing-based propulsion, with early consideration given to soft wing concepts derived from high-performance foiling monohulls. These were ultimately rejected due to the large structural loads required to shape the membrane, the resulting rig forces transferred to the hull, and the limited suitability for the operational profile of a superyacht. A rigid wing sail was identified as aerodynamically superior, functioning as a true air-foil with 10 times lower drag than a conventional tube mast (even with the sails lowered), while also allowing passive feathering when unloaded.<img src="https://photo-assets.superyachttimes.com/photo/371695/image/large-f6fba2ad9ba66c269310feeea6a26fee.jpg" data-gid="gid://syiq/Photo/371695">Active control“Wing sails have been proven in racing environments such as the America’s Cup and <a data-gid="gid://syiq/Company/6878" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="SailGP (Company)">SailGP</a>,” argues Dr Iain Percy, founder and CEO of <a data-gid="gid://syiq/Company/7904" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Artemis Maritime (Company)">Artemis Technologies</a>, himself an AC veteran and double Olympic champion. “The challenge here is adapting that performance into a reliable, low-maintenance system suitable for a superyacht. To do that, a significant part of the development has focused on active control to manage performance, comfort and manoeuvring across a wide range of conditions.”Initial testing of the wing concept was conducted using a free-standing, rotating carbon-fibre wing mounted on a J22 test platform. The trials confirmed the wing’s ability to passively align with the wind and maintain low drag, but also revealed some dynamic coupling between the wing’s oscillatory behaviour and the natural roll frequency of the monohull. These findings convinced the team to focus on a multihull configuration, as the increased initial stability of a catamaran minimises roll-induced excitation of the wing system and the loads on the two sets of bearings inside the yacht, although <a data-gid="gid://syiq/Company/122" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Royal Huisman (Company)">Royal Huisman</a> does not preclude monohull applications in the future.<img src="https://photo-assets.superyachttimes.com/photo/371647/image/large-3db5887279a6542cf289be78a33db442.jpg" data-gid="gid://syiq/Photo/371647">“The wing sail concept is better suited to a catamaran platform as the rig remains upright and is not subjected to large heel-induced load variations,” explains de Jong. “By limiting heel angles, the vessel also avoids one of the primary deterrents for owners transitioning from motor yachts to sailing yachts, not to mention the absence of flogging sails and running rigging.”The wing comprises a thin aerodynamic Mylar skin supported by a carbon-fibre framework of spars, ribs and transverse plates, which manage the global bending and torsional loads much like the wings of an airplane. Controlled flexibility is incorporated into the design to allow the wing to twist under load, improving lift distribution and reducing peak stresses. <img src="https://photo-assets.superyachttimes.com/photo/371658/image/large-87c2c4becc7abb55160fd76750f46e73.jpg" data-gid="gid://syiq/Photo/371658">AutomationAutomation is fundamental to the operational viability of the wing system. Conventional sail handling is replaced by wing rotation and deflection of the four trailing-edge flaps, actuated by hydraulic cylinders at the root of each flap. Sensor-driven software continuously adjusts the wing’s angle of attack and flap configuration in response to wind conditions, reducing crew workload and minimising the risk of human error. The control algorithms are the result of CFD models developed in collaboration with Artemis, drawing on experience from high-performance sailing applications.&nbsp;Feathering is a critical safety feature, so if the active system fails the wing naturally aligns with the wind and minimises drag. In extreme or turbulent conditions, it is designed to depower automatically to a low-load, low-drag state without requiring crew intervention. Although it’s designed to remain upright in all weather conditions, a hydraulic hinge mechanism allows the entire wing to be lowered to reduce air draught for bridge clearance or maintenance purposes. <img src="https://photo-assets.superyachttimes.com/photo/393334/image/large-cbf9c3c68a163712f4ddc521e251b194.png" data-gid="gid://syiq/Photo/393334">From a lifecycle standpoint, Dr Percy points out that a wing sail replaces a consumable system with a permanent one. Conventional sails degrade and require regular replacement, whereas a properly designed wing can last for the life of the yacht. This permanence shifts cost and maintenance considerations away from periodic sail replacement towards upfront engineering and long-term reliability.“Manufacturing feasibility has also been a central consideration throughout development,” says Bart van der Meer, sailing system engineer at <a data-gid="gid://syiq/Company/458" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Rondal B.V. (Company)">Rondal</a>. “Each rib of the wing requires a unique mould due to the changing airfoil geometry along the span. We expect production-scale moulds are expected to be fabricated from milled aluminium to ensure dimensional accuracy and repeatability.”Although these challenges are not trivial, they are a question of process optimisation rather than unresolved technical risk.<img src="https://photo-assets.superyachttimes.com/photo/393329/image/large-e0fb3f469c6062ee583c2c1998445a5c.jpg" data-gid="gid://syiq/Photo/393329">Built like a bridgeStructurally, the AERA catamaran departs from conventional multihull architecture through the use of principles derived from cantilevered bridge design – notably the historic Koningshaven Bridge (also known as ‘De Hef’) close to <a data-gid="gid://syiq/Company/43" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Cor D. Rover Design (Company)">Cor D Rover</a>’s studio in Rotterdam. The triangulated geometry spans large distances between pillars, enabling open-plan interiors and extensive glazing without visually dominant pillars.&nbsp;The asymmetrical geometry of the vessel is a functional response to spatial and structural requirements rather than an aesthetic gesture. Although the deck levels appear unsupported, structural integrity is maintained through clearly defined global load paths disguised in features such as staircases. <img src="https://photo-assets.superyachttimes.com/photo/371698/image/large-b28b9a6de23b265903ea61bfe20d603d.png" data-gid="gid://syiq/Photo/371698">“The geometry follows the forces rather than being applied as a stylistic layer,” explains <a data-gid="gid://syiq/Company/43" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Cor D. Rover Design (Company)">Cor D Rover</a>. “Structural cut-outs allow semi-open areas to remain outside the tonnage calculations while still contributing to stiffness and spatial articulation. Despite this unconventional arrangement, the enclosed volume is carefully controlled at approximately 1,880 cubic metres, keeping the vessel below the 500 GT threshold.”Material selection for the hull and superstructure is centred on aluminium, chosen for its strength-to-weight ratio, recyclability, and compatibility with <a data-gid="gid://syiq/Company/122" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Royal Huisman (Company)">Royal Huisman</a>’s expertise in working with lightweight aluminium alloys. Weight control is particularly critical for a catamaran, as increased mass directly raises wetted surface area and drag. <a data-gid="gid://syiq/Company/7904" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Artemis Maritime (Company)">Artemis Technologies</a> was closely involved in optimising the hull forms to balance hydrodynamic efficiency with superyacht functionality.“Our naval architects actually found the constraints of the superyacht design space to be a valuable tool in refining the hull shapes,” says Dr Percy. “By working within a predefined functional window that takes into account accommodation needs, utilities and other essential factors, they were able to focus on local optimisation and maximise the efficiency of the hull design.”<img src="https://photo-assets.superyachttimes.com/photo/393335/image/large-11dc06fc86174d979606f874bfc85d4a.png" data-gid="gid://syiq/Photo/393335">Energy generationEquipped with two retractable, forward-facing, azimuthing thrusters, AERA’s energy generation is organised around a hybrid diesel-electric architecture and 580-kWh battery bank for efficient integration of multiple power sources. <a data-gid="gid://syiq/Company/122" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Royal Huisman (Company)">Royal Huisman</a> installed a similar system on 60-metre <a data-gid="gid://syiq/Yacht/8258" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Sarissa59.7m (195'10&quot;)Royal Huisman2023">Sarissa</a> in 2023, but on AERA has added compressed hydrogen tanks for supplying a low-temperature PEM hydrogen fuel cell. With Approval in Principle from Lloyd’s Register, the system is designed to provide approximately 72 hours of silent hotel-load operation.As with <a data-gid="gid://syiq/Yacht/8258" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Sarissa59.7m (195'10&quot;)Royal Huisman2023">Sarissa</a>, hydrogeneration plays a primary role during sailing with under-hull generators optimised for operating speeds between 11 and 12 knots. At these speeds, continuous power output of around 40 kW is achievable, sufficient to cover hotel loads and allow generators to remain offline. The fixed, low-drag hydrogenerators deliver optimal performance without the added complexity of retraction mechanisms – a solution that aligns with AERA’s ethos of simplicity and high efficiency.<img src="https://photo-assets.superyachttimes.com/photo/393328/image/large-15f017ba3b5bb5892a3a52ed2dc5ad1c.jpg" data-gid="gid://syiq/Photo/393328">“Our simulations show that during a typical cruising week, including one visit shoreside when shore power is available, the yacht will not need to run her variable-speed gensets for hotel loads,” says Jidde Looijenga, innovation manager at <a data-gid="gid://syiq/Company/122" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Royal Huisman (Company)">Royal Huisman</a>. “They are needed only during motoring or motor sailing to generate electricity for the retractable propulsion system. Naturally, they can also run on HVO for substantial reductions in CO₂ and Nox emissions.”Together with <a data-gid="gid://syiq/Company/43" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Cor D. Rover Design (Company)">Cor D Rover</a>, the shipyard team is exploring the integration of wind turbines to generate electrical power at anchor or in port. Any such system would be supplementary rather than critical and, as the designer notes, “would need to operate with very low noise and vibration to be acceptable in a yacht environment.” These ideas are not on the project’s critical path, but they illustrate potential future extensions of <a data-gid="gid://syiq/Company/122" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Royal Huisman (Company)">Royal Huisman</a>’s renewable energy strategy.<img src="https://photo-assets.superyachttimes.com/photo/393332/image/large-3aaca815d143ace4293d0ef4519ca552.png" data-gid="gid://syiq/Photo/393332">UsabilityBeyond technical feasibility, the AERA concept also addresses usability and the owner experience. The combination of automation, reduced manual sail handling, and increased comfort is intended to make sailing more accessible and as straightforward as operating a motor yacht.&nbsp;“Combined with reduced fuel consumption and lower operational emissions, this positions AERA as a bridge between motor and sailing yacht ownership,” says Looijenga.Overall, the catamaran represents a convergence of proven technologies and disciplined system integration rather than reliance on untested innovations. With its emphasis on simplicity, sustainability and lifecycle efficiency, the concept demonstrates that a wind-dominant, low-emission superyacht is technically achievable within available engineering and classification frameworks.<img src="https://photo-assets.superyachttimes.com/photo/371693/image/large-d494cdf4de75a63242521821d563f54f.png" data-gid="gid://syiq/Photo/371693">

Royal Huisman AERA catamaran

Royal Huisman's 50m hydrodynamic luxury yacht 

AERA catamaran: The wind-dominant, low-emission sailing superyacht

Starting out as a captain, Simon Finlayson quickly found himself drawn into the mechanics of new-build decision-making – first as a build captain, then as an owner’s representative. Recognising the value of understanding how yachts are built from the inside out, he moved into the yards, working within both project management and production team, to close the knowledge gap between owner expectations and shipyard execution.<img src="https://photo-assets.superyachttimes.com/photo/390228/image/large-d82f02d6f20048f162b3e9f36ff01c3a.jpg" data-gid="gid://syiq/Photo/390228">You’ve worked across both sailing and motor yachts. What’s the biggest practical difference from a build perspective? A sailing yacht spends much of its life heeled over, while a motor yacht generally operates upright but rolls. That single reality drives countless knock-on decisions. Something as basic as getting suppliers to confirm their equipment will operate at heel sounds simple, but it’s a major consideration that can be overlooked until late in the process. Beyond that, industry culture differs. Sailing yacht teams often have more human connection and personal involvement in material choices and how the boat comes together. Motor yacht projects, especially at the larger end, tend to be more contract-led – lines are more clearly defined, and communication can become more formal and legalistic.<img src="https://photo-assets.superyachttimes.com/photo/372358/image/large-f8a547ead4e5dc9366a98d8c53b3ebb5.jpg" data-gid="gid://syiq/Photo/372358">Where do sailing yacht builds demand the most attention during construction? Construction and engineering discipline – particularly strength versus weight and load management. Sailing yachts face more dynamic load cases than motor yachts. Rig, structure, deck gear, and load paths have to be correct because the forces are very real and move around the boat depending on sail plan and conditions. Then there’s the constant balancing act between complexity, available space, and operational simplicity. You can specify incredible technology, but someone has to operate it while also sailing the yacht. It’s very easy to spiral into systems that are elegant on paper yet impractical at sea.You mentioned technology can become a “rabbit hole”. What does that mean in practice? It often starts with good intentions: more automation, more integration, more capability. Engineers are focused specialists and can build something technically impressive. But if the operational interface becomes too complex, the crew won’t embrace it, faults become harder to diagnose, and the yacht ends up carrying systems that don’t truly help. The challenge is finding a workable middle ground – systems that deliver performance without turning routine operation into an engineering exercise.<img src="https://photo-assets.superyachttimes.com/photo/106261/image/large-8723f43ab69bd20d62467c9657646233.jpg" data-gid="gid://syiq/Photo/106261">You’ve been brought into projects to assist with re-aligning goals and expectations. What’s your go-to framework for getting control quickly? I try to keep it simple and scaleable: what did you say you would do, what are you doing now, and does that still fit our expectations?’ Then keep looping that conversation until everyone agrees on what “done” looks like. It’s mostly expectation management – but grounded in facts, not opinions.How do you bring shipyard processes into sync with specialist contractors and designers? By respecting expertise. If I come to you for doors, it’s because you’re the best at doors – you should advise how to solve the problem. Shipyards can sometimes push a “we always do it like this” approach, but many suppliers have good reasons for their preferred methods. In the Netherlands especially, you see deep specialisation. The industry is successful because experts can operate within a niche at the top end of their field. The best outcomes come when you give that expertise space, listen, acknowledge it, and then clearly define demarcation and deliverables.<img src="https://photo-assets.superyachttimes.com/photo/185959/image/large-e9814fcc0864c8409951eb957946f58b.jpg" data-gid="gid://syiq/Photo/185959">Where do schedules most commonly come under pressure on new builds? There are typically two pinch points. First is the start of construction. Different yards approach engineering and production differently. Some “engineer, then build”, while others start building early to protect the programme. Either way, you need clear decision gates – moments to say, “we know enough to proceed,” or equally, “we don’t know enough yet, so stopping now prevents rework later.”Then there is finishing and acceptance. Getting from a dynamic production environment to a finished, accepted space or system requires a high level of coordination. Someone has to confirm it is correct – yard-side or owner-side – and that acceptance can &nbsp;proceed based on facts rather than opinions. It requires checking, testing, cleaning, close-out, and a shared understanding of what remains outstanding. It’s easy to reach the end of hours or budget and declare, “it’s done.” In reality, that’s often the start of the hard part: delivering something that can be signed off with confidence.<img src="https://photo-assets.superyachttimes.com/photo/367902/image/large-6b292765f8464aaae3fe8b1c81e49d1e.jpg" data-gid="gid://syiq/Photo/367902">Change orders can lead to major timeline extensions. Can they be prevented? Not always. The first question is whether the change is driven by necessity or desire. Sometimes change is essential for safety, practicality, compliance, or evolving technology. The key is catching it early enough to minimise impact, and that brings us back to the one tool that matters at every level: the specification. Every conversation – with the owner’s team, suppliers, and within the yard – should orbit the spec. The moment you realise you’re discussing something that wasn’t agreed, you stop and reset: why are we talking about this change, what decision is required, and how do we proceed? If you lose the spec, you lose control.&nbsp;What technical trends are most likely to influence yacht building over the next decade? Propulsion and energy architecture will determine the technological backbone of future yachts. Moving toward battery-driven propulsion and DC-based electrical systems rather than traditional AC isn’t a bolt-on change – it affects the entire vessel. It requires a shift in engineering knowledge, build experience, and operational capability. You can design these systems, but they must be simple enough for the crew to operate. If nobody can operate it, you can’t build it – at least not responsibly.Another major theme is materials availability, with teak decks becoming a particularly visible battleground. It’s not only about sourcing; it’s about persuading stakeholders to rethink what a “proper” deck should look and feel like. The industry is, by nature, building the future using the past. That’s powerful, but it can also trap you in familiar solutions when the best answer is changing.<img src="https://photo-assets.superyachttimes.com/photo/113629/image/large-ebbb6667281aa6927f85947a0a313e82.jpg" data-gid="gid://syiq/Photo/113629">You’ve been involved in some standout yachts. Which projects most shaped your approach as a project manager? <a data-gid="gid://syiq/Yacht/4241" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Wisp47.65m (156'4&quot;)Royal Huisman2014">Wisp</a> was a pivotal learning curve – a classic sailing yacht build that showed me how much I still didn’t know about shipyard reality, even when deeply involved on site. Later, working inside a shipyard environment at De Vries on major deliveries such as Moonrise and Bliss accelerated my understanding of just how complex coordination can be.The real benchmark for me, though, has been the <a data-gid="gid://syiq/Yacht/6409" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Moonrise99.9m (327'9&quot;)Feadship2020">Moonrise</a> programme, because I experienced it from both sides – first for the shipyard and then within the owner’s team on the subsequent project, <a data-gid="gid://syiq/Yacht/11108" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Moonrise100.7m (330'5&quot;)Feadship2025">Moonrise II</a>. That provided a complete view of how decisions, quality control, documentation, and delivery pressures differ depending on where you sit.When design intent is clear and the drive for quality is genuinely high, you get something rare: a yacht where you walk through and everything feels right – layout, flow, system logic, and finish. Being part of that elevates your own performance and sets a standard you try to carry into every other project.

Simon Finlayson on successful yacht building

Simon Finlayson shares expert insights on successful yacht building, from design and engineering to managing expectations and delivery.

Inside Angle: Simon Finlayson on navigating the mechanics of yacht builds

Delivered in 2023 by Spain's <a data-gid="gid://syiq/Company/1732" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Freire Shipyard (Company)">Freire Shipyard</a>, the 111.85-metre superyacht <a data-gid="gid://syiq/Yacht/7970" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Renaissance111.85m (366'12&quot;)Freire Shipyard2023">Renaissance</a> holds the record of being the largest yacht ever built in the country. Recently spotted in Èze, Côte d'Azur, France, SuperYacht Times takes a closer look at the landmark project that established a new benchmark for Spanish yacht construction.<img src="https://photo-assets.superyachttimes.com/photo/397033/image/large-5febe1ee12603bd7dd248d3e7ae5c365.jpg" data-gid="gid://syiq/Photo/397033">1. <a data-gid="gid://syiq/Yacht/7970" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Renaissance111.85m (366'12&quot;)Freire Shipyard2023">Renaissance</a> is the largest yacht ever built in SpainLaunched and delivered in 2023, <a data-gid="gid://syiq/Yacht/7970" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Renaissance111.85m (366'12&quot;)Freire Shipyard2023">Renaissance</a> is the largest yacht ever built in Spain. The Spanish flagship yacht demonstrated <a data-gid="gid://syiq/Company/1732" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Freire Shipyard (Company)">Freire Shipyard</a>’s ability to adapt and meet the highest standards of quality and luxury in the industry and created a new and successful line of business traditionally dominated by other countries. <img src="https://photo-assets.superyachttimes.com/photo/397036/image/large-9b565408a41c5b0508ca31177f424e67.jpg" data-gid="gid://syiq/Photo/397036">2. She was built by a yard better known for commercial vesselsFounded in 1895 in Vigo, Spain, under the name Constuccuiones Navales Paulino Freire, <a data-gid="gid://syiq/Company/1732" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Freire Shipyard (Company)">Freire Shipyard</a> was founded to repair and build fishing vessels for the owner Paulino Freire Piñeiro. By the 1920s the shipyard manufactured its own steam engines and ship components, before focusing on more specialised rotor tugs as well as fishing, patrol and oceanographic vessels by 1990. In 2022, they launched their first superyacht over 100 metres, the 111.85-metre superyacht Renaissance. <img src="https://photo-assets.superyachttimes.com/photo/397040/image/large-b3599dcf3dff25245330f82792f15b53.jpg" data-gid="gid://syiq/Photo/397040">3. Her interior volume spans an impressive 7,200 GTWith an impressive interior volume of 7,200 GT, <a data-gid="gid://syiq/Yacht/7970" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Renaissance111.85m (366'12&quot;)Freire Shipyard2023">Renaissance</a> ranks as one of the largest yachts on the charter market. With such a large volume, her interior and exterior designers <a data-gid="gid://syiq/Company/17" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Bannenberg & Rowell Design (Company)">Bannenberg &amp; Rowell Design</a> have utilised her 5.7-metre ceiling height in her main saloon, adorning her with sumptuous fabrics and exquisite furnishings from Höller, while creating an air of unrestricted freedom.You can explore <a data-gid="gid://syiq/Article/59259" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="A first look at the interiors of the 112m Freire superyacht Renaissance (2024-06-24 15:00:00 +0200)">more about her interior here</a>. <img src="https://photo-assets.superyachttimes.com/photo/397037/image/large-352dc58338bab504de7fc7ac16c0353c.jpg" data-gid="gid://syiq/Photo/397037">4. She accommodates up to 36 guests onboard<a data-gid="gid://syiq/Yacht/7970" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Renaissance111.85m (366'12&quot;)Freire Shipyard2023">Renaissance</a> can accommodate up to 36 guests, across 19 elegant staterooms, with her full-beam master suite located on the owner’s deck. The owner’s stateroom includes his-and-hers walk-in wardrobes and his-and-hers bathrooms with a connecting lounge. Her 60 square-metre owner’s deck features a media, cinema room and an opulent saloon bar, while exterior spaces include a bar and an alfresco dining area, with seating for up to 12 guests, as well as a Jacuzzi for six on the owner’s foredeck.<img src="https://photo-assets.superyachttimes.com/photo/397032/image/large-35cbf896ac39b970ebfa29088e6b0f8e.jpg" data-gid="gid://syiq/Photo/397032"><img src="https://photo-assets.superyachttimes.com/photo/397039/image/large-159277765b9f948d43e77dbb98316f82.jpg" data-gid="gid://syiq/Photo/397039">5. She was designed with charter in mindWith six decks to enjoy, guests have plenty to explore onboard <a data-gid="gid://syiq/Yacht/7970" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Renaissance111.85m (366'12&quot;)Freire Shipyard2023">Renaissance</a>. Her triple-aspect beach club provides the perfect opportunity for guests to unwind, while her Jazz bar and cinema provide infinite entertainment. <a data-gid="gid://syiq/Yacht/7970" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Renaissance111.85m (366'12&quot;)Freire Shipyard2023">Renaissance</a> even boasts a pizza oven for an authentically Italian dining experience. She is also equipped with a fully-certified helipad which is the perfect location for evening events, as well as four custom-designed <a data-gid="gid://syiq/Company/5735" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Cockwells (Company)">Cockwells</a> tenders, allowing guests to explore further afield when onboard.She is currently available for charter with <a data-gid="gid://syiq/Company/159" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Burgess (Company)">Burgess</a>, with rates starting from €3,000,000 per week.<img src="https://photo-assets.superyachttimes.com/photo/397035/image/large-4d00fe7e9d9861f348c6a623bfb2af92.jpg" data-gid="gid://syiq/Photo/397035">6. Her onboard facilities rival a five star resort hotelKey additional amenities onboard <a data-gid="gid://syiq/Yacht/7970" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Renaissance111.85m (366'12&quot;)Freire Shipyard2023">Renaissance</a> include a capacious gym area, which her designers <a data-gid="gid://syiq/Company/17" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Bannenberg & Rowell Design (Company)">Bannenberg &amp; Rowell Design</a> claim is one of the largest onboard a yacht and which opens out onto yet another aft deck. The spa deck is also home to an extensive wellness centre, including two plunge pools, a steam room, sauna, massage rooms and a hair salon.<img src="https://photo-assets.superyachttimes.com/photo/397031/image/large-3752462f6b43d5aba82f7e1bb10f1817.jpg" data-gid="gid://syiq/Photo/397031">

Renaissance: Six facts about Spain’s largest superyacht

SuperYacht Times takes a closer look at the 112m yacht Renaissance that established a new benchmark for Spanish yacht construction.

<a data-gid="gid://syiq/Company/4700" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Grand Soleil (Company)">Grand Soleil</a> has unveiled all the details of the 26.2-metre sailing yacht <a data-gid="gid://syiq/Yacht/14791" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Bianca II26.2m (85'11&quot;)Grand Soleil2026">Bianca II</a>, the first unit of the Grand Soleil Plus 80 Long Cruise, and ahead of her public debut at the <a data-gid="gid://syiq/Company/4556" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Cannes Yachting Festival (Company)">Cannes Yachting Festival</a> this September.<img src="https://photo-assets.superyachttimes.com/photo/397627/image/large-d2b48ce4c7fa394b7bf17202f633c445.jpg" data-gid="gid://syiq/Photo/397627">Following her March 2026 launch and a private owner preview during the Grand Soleil Cup (21–23 May) in Porto Cervo, the new flagship joins the shipyard’s Plus line for yachts over 18 metres.<img src="https://photo-assets.superyachttimes.com/photo/397663/image/large-6dc4bf80e1a324b5553074bbe652810b.jpg" data-gid="gid://syiq/Photo/397663">Built entirely in-house by <a data-gid="gid://syiq/Company/7265" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Cantiere Del Pardo (Company)">Cantiere del Pardo</a>, <a data-gid="gid://syiq/Yacht/14791" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Bianca II26.2m (85'11&quot;)Grand Soleil2026">Bianca II</a> features naval architecture by <a data-gid="gid://syiq/Company/8039" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Matteo Polli Yacht Design (Company)">Matteo Polli</a>, while her exterior and interior design were penned by <a data-gid="gid://syiq/Company/153" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Nauta Yachts S.r.l. (Company)">Nauta</a>.<img src="https://photo-assets.superyachttimes.com/photo/397632/image/large-9cf46fa7f4bc95a043247d79f161f289.jpg" data-gid="gid://syiq/Photo/397632"><img src="https://photo-assets.superyachttimes.com/photo/397634/image/large-d8ce8f4d2b61b94c0ac9b12c9b62b00e.jpg" data-gid="gid://syiq/Photo/397634">Read more:&nbsp;<a data-gid="gid://syiq/Article/65738" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="First 26m Grand Soleil Plus 80 Long Cruise yacht Bianca II launched (2026-03-30 14:30:00 +0200)">First 26m Grand Soleil Plus 80 Long Cruise yacht Bianca II launched</a>The <a data-gid="gid://syiq/Company/4700" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Grand Soleil (Company)">Grand Soleil</a> Plus 80 Long Cruise is constructed using a composite sandwich structure with epoxy-based vinylester resin and vacuum infusion techniques, complemented by extensive carbon fibre reinforcements in high-load areas.<img src="https://photo-assets.superyachttimes.com/photo/397636/image/large-988931bf3055a59de2fb3d66b664f0d5.jpg" data-gid="gid://syiq/Photo/397636">According to the shipyard, the yacht is built using an "in-place" method, where the structural elements are engineered around the final interior layout, improving the integration between construction and onboard systems with the overall design.<img src="https://photo-assets.superyachttimes.com/photo/397642/image/large-37c96fd66d0afa54f62a008ff25077ec.jpg" data-gid="gid://syiq/Photo/397642"><img src="https://photo-assets.superyachttimes.com/photo/397660/image/large-87a605e2cfa9cffa913767afe6e3319a.jpg" data-gid="gid://syiq/Photo/397660" style="box-sizing: inherit; border: 0px; font-family: &quot;Open Sans&quot;, sans-serif; position: relative; max-width: 100%; margin: 1rem 0px; color: rgb(0, 0, 0); font-size: 13.6px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial; background-color: rgb(255, 255, 255);">Commenting on the project, Franco Corazza, Project Manager of the Plus said: "In true <a data-gid="gid://syiq/Company/4700" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Grand Soleil (Company)">Grand Soleil</a> tradition, the GS Plus 80 LC has been built entirely in-house, from lamination through to launch. This approach allows stricter quality control and promotes greater integration between construction and onboard systems, enabling us to fully meet the requirements of our owners."<img src="https://photo-assets.superyachttimes.com/photo/397641/image/large-13db70ec6ee01903e4441753f23ce6b3.jpg" data-gid="gid://syiq/Photo/397641">Designed for long-range cruising, <a data-gid="gid://syiq/Yacht/14791" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Bianca II26.2m (85'11&quot;)Grand Soleil2026">Bianca II</a> is equipped with a fully integrated hydraulic system managing all deck operations, including the winches, mast systems, telescopic keel and sail plan adjustments through a single centralised hydraulic circuit. <img src="https://photo-assets.superyachttimes.com/photo/397647/image/large-478cdd82b21b750a2913ccb1c08af504.jpg" data-gid="gid://syiq/Photo/397647">At the center of her energy architecture is a Torqeedo hybrid platform integrating propulsion and hotel loads management, powered by twin 40 kWh battery packs and supported by twin 45 kW generators for extended cruising autonomy.<img src="https://photo-assets.superyachttimes.com/photo/397661/image/large-f739aefefae17cfd0be94b294423c62d.jpg" data-gid="gid://syiq/Photo/397661">In terms of blueprint, her sail plan features a carbon mast and boom, rod rigging and a fixed bowsprit configured for multiple sail combinations. This includes traditional and furling gennakers, with optional staysail and storm jib arrangements for varying sailing conditions.<img src="https://photo-assets.superyachttimes.com/photo/397644/image/large-78b79496a8427b226b6b035396738f43.jpg" data-gid="gid://syiq/Photo/397644">Stepping inside, <a data-gid="gid://syiq/Yacht/14791" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Bianca II26.2m (85'11&quot;)Grand Soleil2026">Bianca II</a> features a raised coachroof with 270-degree glazing, flooding her warm oak interior with natural light and panoramic sea views. The open-plan saloon serves as the main social hub, featuring discreet technical space beneath the sole for electrical and mechanical systems.<img src="https://photo-assets.superyachttimes.com/photo/397648/image/large-6c9481e582fe9c6d07e104ce657c8c02.jpg" data-gid="gid://syiq/Photo/397648"><img src="https://photo-assets.superyachttimes.com/photo/397657/image/large-94db26bf6ce12bdc42753178bbdecf19.jpg" data-gid="gid://syiq/Photo/397657">Spanning a beam of 6.6 metres, accommodation onboard the 80 GT yacht includes a forward owner's suite and three guest staterooms. Designed for comfort during extended passages, her layout features a spacious galley and navigation area, while maintaining clear separation between guest and crew quarters for enhanced privacy.<img src="https://photo-assets.superyachttimes.com/photo/397651/image/large-ed4a40be0b9497ad1f17eabc3cfdc0ff.jpg" data-gid="gid://syiq/Photo/397651"><img src="https://photo-assets.superyachttimes.com/photo/397652/image/large-2e965ae899a24144b0a377a998e2bb77.jpg" data-gid="gid://syiq/Photo/397652">Reflecting on the design, Massimo Gino, CEO and Co-Founder of <a data-gid="gid://syiq/Company/153" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Nauta Yachts S.r.l. (Company)">Nauta</a>, said: "An 80-foot [26.2-metre] yacht is among the most demanding sizes to design. We've meticulously optimised the freeboard heights, interior spaces, and cabin sizes, integrating all necessary equipment and accessories in every area. An 80-foot yacht must encompass the qualities, functions, and features typically found on yachts ranging from 95 to 100 feet."<img src="https://photo-assets.superyachttimes.com/photo/397661/image/large-f739aefefae17cfd0be94b294423c62d.jpg" data-gid="gid://syiq/Photo/397661"><img src="https://photo-assets.superyachttimes.com/photo/397666/image/large-799f3d164adb970e0c3896b180dc5173.jpg" data-gid="gid://syiq/Photo/397666">

Grand Soleil unveils details of flagship Plus 80 Long Cruise yacht Bianca II

Grand Soleil has unveiled details of its flagship Plus 80 Long Cruise yacht Bianca II ahead of her public debut at the Cannes Yachting Festival.


home-featured-topleft#0

Onboard the 26m flagship Grand Soleil Plus 80 Long Cruise yacht Bianca II

<img src="https://photo-assets.superyachttimes.com/photo/397665/image/large-7994956440ed0f9f14c2520a58e5fb1c.jpg" data-gid="gid://syiq/Photo/397665">The 55.2-metre <a data-gid="gid://syiq/Company/570" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Admiral (Company)">Admiral Yachts</a> superyacht <a data-gid="gid://syiq/Yacht/10188" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Silver Star I55.2m (181'1&quot;)Admiral2023">Silver Star I</a> has been sold. Julia Skoptsova of <a data-gid="gid://syiq/Company/5144" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Smart Yachts (Company)">Smart Yachts</a> introduced the buyer, while Jean-Claude Carme of <a data-gid="gid://syiq/Company/4547" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="TWW Yachts (Company)">TWW Yachts</a>, together with <a data-gid="gid://syiq/Company/4841" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Seawood Yachts (Company)">Seawood Yachts</a>, represented the seller.Delivered in 2024, she features naval architecture developed in-house by her builder, with bespoke interiors by <a data-gid="gid://syiq/Company/558" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Armani/Casa (Company)">Armani/Casa</a> and <a data-gid="gid://syiq/Company/4563" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Gian Marco Companino Design (Company)">Gian Marco Companino Design</a>, the latter also responsible for her exterior design.<a data-gid="gid://syiq/Yacht/10188" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Silver Star I55.2m (181'1&quot;)Admiral2023">Silver Star I</a> can accommodate up to 12 guests across six well-appointed staterooms, including a full-beam VIP suite. Her main deck dining area seamlessly connects to the exterior decks through sliding glass doors, creating a fluid indoor-outdoor living experience. Additional onboard highlights include a beach club and a large multifunctional circular helipad. On the upper deck, guests can enjoy a Jacuzzi, bar, and lounge area.In terms of propulsion, she is powered by twin <a data-gid="gid://syiq/Company/1408" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Caterpillar Inc (Company)">Caterpillar</a> engines, delivering a cruising speed of 16.5 knots and a top speed of 18 knots.At the time of sale, <a data-gid="gid://syiq/Yacht/10188" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Silver Star I55.2m (181'1&quot;)Admiral2023">Silver Star I</a> had a last known asking price of €29,990,000.Photo courtesy of <a data-gid="gid://syiq/Company/570" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Admiral (Company)">Admiral Yachts</a>.

Admiral yacht Silver Star I sold

The 55.2-metre Admiral Yachts superyacht Silver Star I has been sold

55m Admiral superyacht Silver Star I sold

The 46.3-metre <a data-gid="gid://syiq/Company/40" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Royal Hakvoort Shipyard (Company)">Hakvoort</a> motor yacht <a data-gid="gid://syiq/Yacht/608" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Amica Mea46.3m (151'11&quot;)Royal Hakvoort Shipyard2004">Amica Mea</a> is currently on the market with Richard Higgins and Kristen Klein of <a data-gid="gid://syiq/Company/526" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Northrop & Johnson (Company)">Northrop &amp; Johnson</a>.<img src="https://photo-assets.superyachttimes.com/photo/397668/image/large-2d7768e93b694cd08f1846a7ba40e2d9.jpg" data-gid="gid://syiq/Photo/397668">Delivered in 2004 by the Dutch shipyard, the<a data-gid="gid://syiq/Yacht/608" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Amica Mea46.3m (151'11&quot;)Royal Hakvoort Shipyard2004">&nbsp;Amica Mea yacht for sale</a> features exterior and interior design by <a data-gid="gid://syiq/Company/42" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Glade Johnson Design, Inc. (Company)">Glade Johnson Design</a>, with naval architecture by <a data-gid="gid://syiq/Company/15" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Vripack (Company)">Vripack</a>.<img src="https://photo-assets.superyachttimes.com/photo/397667/image/large-d3891bd4c42eb96ef4207749668929be.jpg" data-gid="gid://syiq/Photo/397667">Constructed with a steel hull and aluminium superstructure, the <a href="https://www.superyachttimes.com/directories/yachts/for-sale/of-type=motor" rel="noopener noreferrer" target="_blank" title="">motor yacht for sale</a> completed her 20-year <a data-gid="gid://syiq/Company/1452" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Lloyd's Register (Company)">Lloyd's Register</a> survey in 2024 and has since benefitted from a substantial technical programme carried out between 2023 and 2025, including major machinery, navigation and stabilisation upgrades.<img src="https://photo-assets.superyachttimes.com/photo/397674/image/large-6d7ff09ced6d5c63daf6dbd1ceaa4e3a.jpg" data-gid="gid://syiq/Photo/397674">Stepping inside the <a href="https://www.superyachttimes.com/directories/yachts/for-sale/built-by=hakvoort" rel="noopener noreferrer" target="_blank" title="">Hakvoort yacht for sale</a>, her main saloon is illuminated with natural light thanks to her floor-to-ceiling windows. Designed for gatherings, she also features a bar alongside a formal dining area that could seat up to 12 guests. Moreover, her skylounge is fitted with a second bar, offering an additional social space for guests to socialise while enjoying the ocean vistas.<img src="https://photo-assets.superyachttimes.com/photo/397672/image/large-04ae72ad470b83122fa30497d544df43.jpg" data-gid="gid://syiq/Photo/397672"><img src="https://photo-assets.superyachttimes.com/photo/397671/image/large-0ea431bd1d3ff6f4e0330efb8d14fe8c.jpg" data-gid="gid://syiq/Photo/397671">On deck, <a data-gid="gid://syiq/Yacht/608" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Amica Mea46.3m (151'11&quot;)Royal Hakvoort Shipyard2004">Amica Mea</a> offers an aft deck arranged for alfresco dining, while her sundeck features a Jacuzzi wrapped with seats for guests to unwind in while cruising. Moreover, a beach set-up complete with chairs, tables, a gazebo and barbecue, providing more spaces for entertaining. Additional amenities include a tender garage, extensive onboard storage and dedicated toy stowage to support extended cruising as well as day-to-day operations.<img src="https://photo-assets.superyachttimes.com/photo/397673/image/large-1234461961641effa3d80c5801598ee2.jpg" data-gid="gid://syiq/Photo/397673" style="box-sizing: inherit; border: 0px; font-family: &quot;Open Sans&quot;, sans-serif; position: relative; max-width: 100%; margin: 1rem 0px; color: rgb(0, 0, 0); font-size: 13.6px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">With a beam of 8.94-metres and an interior volume of 499 GT, accommodation onboard the <a href="https://www.superyachttimes.com/directories/yachts/for-sale" rel="noopener noreferrer" target="_blank" title="">yacht for sale</a> is arranged for up to 11 guests across a five-staterooms configuration. This comprises a main-deck owner's suite and four guest staterooms on the lower deck. Dedicated quarters provide accommodation for up to nine crew members, including her captain.<img src="https://photo-assets.superyachttimes.com/photo/397675/image/large-00dcdf148e7a47ac50d7428716082a3f.jpg" data-gid="gid://syiq/Photo/397675"><img src="https://photo-assets.superyachttimes.com/photo/397677/image/large-148c9f4974b50652b698b3db45c9a7c9.jpg" data-gid="gid://syiq/Photo/397677"><img src="https://photo-assets.superyachttimes.com/photo/397676/image/large-a9668a9276c35f40b638d1a630e13187.jpg" data-gid="gid://syiq/Photo/397676">In terms of performance, the <a data-gid="gid://syiq/Yacht/608" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Amica Mea46.3m (151'11&quot;)Royal Hakvoort Shipyard2004">yacht Amica Mea for sale</a> is powered by twin <a data-gid="gid://syiq/Company/1408" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Caterpillar Inc (Company)">Caterpillar</a> engines, delivering a cruising speed of 12 knots and a top speed of 14 knots. <img src="https://photo-assets.superyachttimes.com/photo/397669/image/large-a6385bb1f65a07a9d92e582ac73baf6b.jpg" data-gid="gid://syiq/Photo/397669">All images provided courtesy of <a data-gid="gid://syiq/Company/526" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Northrop & Johnson (Company)">Northrop &amp; Johnson</a>.

46m Hakvoort motor yacht Amica Mea for sale

The 46.3m Hakvoort motor yacht Amica Mea has joined the market with Northrop & Johnson.

<img src="https://photo-assets.superyachttimes.com/photo/397455/image/large-20ac566c8bb51a7b8a4b1ec5e51b7440.jpeg" data-gid="gid://syiq/Photo/397455">The 52-metre <a data-gid="gid://syiq/Company/212" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Benetti SpA (Company)">Benetti</a> superyacht <a data-gid="gid://syiq/Yacht/518" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Lady B52.0m (170'7&quot;)Benetti SpA2008">Lady B</a> was recently spotted at anchor off Salcombe, on the South Devon coast of England. According to AIS data, she is currently moored in Falmouth.Delivered in 2008, <a data-gid="gid://syiq/Yacht/518" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Lady B52.0m (170'7&quot;)Benetti SpA2008">Lady B</a> features exterior design penned by <a data-gid="gid://syiq/Company/245" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Stefano Natucci (Company)">Stefano Natucci</a>, interior created design by <a data-gid="gid://syiq/Company/5687" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Mauro Izzo (Company)">Mauro Izzo</a>, and naval architecture crafted in-house by her builder. She underwent a significant interior refit in 2022, carried out by <a data-gid="gid://syiq/Company/2524" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Destry Darr Designs (Company)">Destry Darr Designs</a> at the <a data-gid="gid://syiq/Company/1263" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Dania Cut Super Yacht Repair Facility (Company)">Dania Cut Superyacht Repair Facility</a>.Measuring 812 GT, <a data-gid="gid://syiq/Yacht/518" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Lady B52.0m (170'7&quot;)Benetti SpA2008">Lady B</a> can accommodate up to 12 guests across six staterooms, including a full-beam owner's suite complete with two private balconies. Onboard highlights include an elegant glass lift and a generous sundeck offering multiple sunbathing areas and alfresco dining for up to 30 guests. The sundeck also features a Jacuzzi, providing a further touch of luxury whilst at sea.With regard to propulsion, the yacht is powered by twin <a data-gid="gid://syiq/Company/1408" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Caterpillar Inc (Company)">Caterpillar</a> engines, delivering a cruising speed of 14 knots and a top speed of 16 knots.

Benetti yacht Lady B in Salcombe

The 52-metre Benetti superyacht Lady B was recently spotted at anchor off Salcombe.

52m Benetti superyacht Lady B in Salcombe

<a data-gid="gid://syiq/Company/584" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Pershing S.p.a. (Company)">Pershing</a> has unveiled the new GTX90, the latest model to join its Sport Utility Yachts range. Developed in collaboration between <a data-gid="gid://syiq/Company/289" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Studio Vallicelli Design (Company)">Studio Vallicelli Design</a> and the Ferretti Group Engineering Department, the new project combines comfort and performance, innovation and craftsmanship, technology and cruising pleasure.<img src="https://photo-assets.superyachttimes.com/photo/397607/image/large-b179f88242cb1326329d8c10bddee37e.jpg" data-gid="gid://syiq/Photo/397607">First presented at boot Düsseldorf, the <a data-gid="gid://syiq/Company/584" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Pershing S.p.a. (Company)">Pershing</a> GTX90 has been conceived to maximise both interior and exterior volumes. She is meant to exceed the standards in its class while delivering excellent performance and seamless continuity between living spaces.<img src="https://photo-assets.superyachttimes.com/photo/397612/image/large-a0c80a11cb7f9777cd06ffd65f822ed0.jpg" data-gid="gid://syiq/Photo/397612">Her exterior follows the established language of the GTX range, characterised by a near-vertical bow, a continuous slightly convex sheer line and the brand's Anniversary Silver hull finish. Her stern features two fold-down side terraces which, when opened, expand the cockpit to a total surface area of 37 square metres. Moreover, a garage aft provides storage for both a tender and a Jet Ski.<img src="https://photo-assets.superyachttimes.com/photo/397609/image/large-52c1409c702993610aab7e11cbb9f92c.jpg" data-gid="gid://syiq/Photo/397609">A defining feature of the new model is its 33-square-metre sportsbridge, which Pershing notes is 43 percent more spacious than the average for yachts of this size. On her main deck, a five-panel glass door creates a seamless connection between the interior and exterior living areas. Furthermore, the widebody saloon is designed for entertaining during voyage, featuring a &nbsp;show galley with a bar counter, a formal dining area for eight, alongside a lounge anchored by an L-shaped sofa . Forward, the helm station provides a commanding view, complete with three pilot seats and immediate access to the side decks.<img src="https://photo-assets.superyachttimes.com/photo/397608/image/large-4569fb7cd9a9987b361849f5a9c9cf27.jpg" data-gid="gid://syiq/Photo/397608">Accommodation is arranged across four ensuite staterooms on the lower deck, comprising a full-beam owner's suite amidships, a VIP stateroom forward and two guest staterooms.<img src="https://photo-assets.superyachttimes.com/photo/397610/image/large-6a61452ca4af656286edaa8444907b54.jpg" data-gid="gid://syiq/Photo/397610"><img src="https://syt-store-production.s3.eu-west-1.amazonaws.com/photo/397613/image/large-45e9c0f4fff98425596a9cb857d7e6a6.jpg?X-Amz-Algorithm=AWS4-HMAC-SHA256&amp;X-Amz-Credential=AKIA52TLVJASOPFTPHWY%2F20260618%2Feu-west-1%2Fs3%2Faws4_request&amp;X-Amz-Date=20260618T155847Z&amp;X-Amz-Expires=900&amp;X-Amz-SignedHeaders=host&amp;X-Amz-Signature=7418909c1e257a5086f5da655fd2285c50146c7ce15e751b7050f2a0b04e8476" data-gid="gid://syiq/Photo/397613">Powered by twin <a data-gid="gid://syiq/Company/1441" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="MAN (Company)">MAN</a> engines paired with <a data-gid="gid://syiq/Company/2027" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Castoldi S.p.A. (Company)">Castoldi</a> TurboDrive 600 HCT waterjets, the <a data-gid="gid://syiq/Company/584" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Pershing S.p.a. (Company)">Pershing</a> GTX90 is expected to reach a top speed of 35 knots and a cruising speed of 30 knots. The model can also be equipped with twin <a data-gid="gid://syiq/Company/2383" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Seakeeper, Inc. (Company)">Seakeeper</a> NG18 gyroscopic stabilisers and is designed to achieve CE Class A certification.<img src="https://photo-assets.superyachttimes.com/photo/397611/image/large-8c0d70844afa3cc85cde5c519586e028.jpg" data-gid="gid://syiq/Photo/397611">

Pershing unveils 27m GTX90 Sport Utility yacht

Pershing has unveiled the new 27m GTX90 Sport Utility yacht, featuring a 43% larger sportsbridge, expanded living spaces and a top speed of 35 knots.

An +80-metre in-build <a data-gid="gid://syiq/Company/29" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Feadship (Company)">Feadship</a> superyacht passed through Amsterdam this afternoon, while preparing for the next stage in her construction. Believed to be the <a data-gid="gid://syiq/Yacht/13848" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Feadship De Vries 101585.0m (278'10&quot;)Feadship2028">Feadship 1015</a> yacht, she was transported from Amsterdam past the SuperYacht Times office. <img src="https://photo-assets.superyachttimes.com/photo/397570/image/large-ad9d9924bf86962a7671dfafe522af44.jpg" data-gid="gid://syiq/Photo/397570">According to AIS data from the 22-metre tug Broedertrouw XIV which was transporting her, the yacht is expected to arrive at the <a data-gid="gid://syiq/Company/29" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Feadship (Company)">Feadship</a> facility in Makkum, the Netherlands early tomorrow morning (19 June).<img src="https://photo-assets.superyachttimes.com/photo/397589/image/large-da0779229d75e3fb61d9cf0339c7e9e2.jpg" data-gid="gid://syiq/Photo/397589"><img src="https://photo-assets.superyachttimes.com/photo/397564/image/large-480deb10862bfecffd09ea64e740ae6c.jpg" data-gid="gid://syiq/Photo/397564"><img src="https://photo-assets.superyachttimes.com/photo/397572/image/large-ef48e0b62d475aef54ea48a31de5db92.jpg" data-gid="gid://syiq/Photo/397572">Constructed with a steel hull and aluminium superstructure, it is believed that based on her build, construction began around 2024. The yacht will be transported to Makkum for outfitting before her estimated launch of 2028.<img src="https://photo-assets.superyachttimes.com/photo/397582/image/large-b35029bf696a77331b1a0c3297ab4a32.jpg" data-gid="gid://syiq/Photo/397582"><img src="https://photo-assets.superyachttimes.com/photo/397571/image/large-132e5bff53544ba8beda5fdffd0bb7f2.jpg" data-gid="gid://syiq/Photo/397571">The first images show a sleek and contemporary profile with expansive deck overhangs and a near-vertical bow. She adopts <a data-gid="gid://syiq/Company/29" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Feadship (Company)">Feadship</a>’s distinctly architectural aesthetic that prioritises volume and visual simplicity.<img src="https://photo-assets.superyachttimes.com/photo/397577/image/large-1d9454132afa63c152e9cb7e31a418b7.jpg" data-gid="gid://syiq/Photo/397577"> <img src="https://photo-assets.superyachttimes.com/photo/397574/image/large-53179c0de31e2c4f019af612c9959a02.jpg" data-gid="gid://syiq/Photo/397574">According to SuperYacht iQ, <a data-gid="gid://syiq/Company/29" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Feadship (Company)">Feadship</a> has several yachts currently in-build including the +140-metre <a data-gid="gid://syiq/Company/29" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Feadship (Company)">Feadship</a> yacht <a data-gid="gid://syiq/Yacht/15474" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Project Maestro143.5m (470'10&quot;)Feadship2029">Project Maestro</a> and the 101.2-metre <a data-gid="gid://syiq/Company/29" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Feadship (Company)">Feadship</a> 1014 yacht <a data-gid="gid://syiq/Yacht/12236" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Destiny101.2m (332'0&quot;)Feadship2026">Destiny</a>, with delivery dates of 2029 and 2026 respectively.<img src="https://photo-assets.superyachttimes.com/photo/397670/image/large-99028cef2eaf45c60b7d5aca65f6e6b0.jpg" data-gid="gid://syiq/Photo/397670"><img src="https://photo-assets.superyachttimes.com/photo/397573/image/large-778bfa2e6c0a1ed9d1e753dfd94962e5.jpg" data-gid="gid://syiq/Photo/397573">

+80m Feadship yacht seen for the first time

An +80-metre in-build Feadship superyacht passed through Amsterdam this afternoon, to the Feadship facility in Makkum.

home-featured-hero#0

+80m in-build Feadship 1015 superyacht seen for the first time

The 26.22-metre <a data-gid="gid://syiq/Company/112" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Custom Line (Company)">Custom Line</a> motor yacht <a data-gid="gid://syiq/Yacht/8624" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="All We Need For Today26.22m (86'0&quot;)Custom Line2009">All We Need For Today</a> has been sold, with Nicola Martinelli of Nauticart introducing the buyer and Edouard Vignal of <a data-gid="gid://syiq/Company/136" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Ocean Independence (Company)">Ocean Independence</a> representing the seller. <img src="https://photo-assets.superyachttimes.com/photo/319050/image/large-95f5982337a87b8df4377b9b9c8fd20e.png" data-gid="gid://syiq/Photo/319050">Delivered in 2009 by the Italian shipyard, <a data-gid="gid://syiq/Yacht/8624" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="All We Need For Today26.22m (86'0&quot;)Custom Line2009">All We Need For Today</a> forms part of the <a data-gid="gid://syiq/Company/112" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Custom Line (Company)">Custom Line</a> Navetta 26 series. She features both exterior design and interiors by <a data-gid="gid://syiq/Company/105" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Zuccon International Project (Company)">Zuccon International Project</a>, with naval architecture developed in-house by <a data-gid="gid://syiq/Company/112" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Custom Line (Company)">Custom Line</a>.Constructed with a GRP hull and superstructure, <a data-gid="gid://syiq/Yacht/8624" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="All We Need For Today26.22m (86'0&quot;)Custom Line2009">All We Need For Today</a> has a beam of 6.93-metres and an interior volume of 89 GT. Accommodation onboard is arranged for up to 10 guests across five staterooms, while separate quarters provide accommodation for a crew of four, including her captain.Designed for comfortable long-range cruising, the yacht offers generous interior living spaces alongside spacious exterior decks for relaxing and entertaining. Notably, her trawler-style platform complements her sleek Italian design and cruising capability, making her well suited for spending some serious time out on the water.In terms of performance, she is powered by twin <a data-gid="gid://syiq/Company/1441" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="MAN (Company)">MAN</a> engines, which deliver a cruising speed of 10 knots and a top speed of 16 knots.At the time of her sale, <a data-gid="gid://syiq/Yacht/8624" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="All We Need For Today26.22m (86'0&quot;)Custom Line2009">All We Need For Today</a> had a last known asking price of €1,990,000.Image courtesy of <a data-gid="gid://syiq/Company/136" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Ocean Independence (Company)">Ocean Independence</a>.

26m Custom Line yacht All We Need For Today sold

The 26.22m Custom Line motor yacht All We Need For Today has been sold with a last known asking price of €1,990,000.


<a data-gid="gid://syiq/Company/374" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Sanlorenzo (Company)">Sanlorenzo</a> has unveiled the new SL80A, introducing the shipyard's iconic asymmetric architecture to the most concentrated interpretation of its historic SL line.<img src="https://photo-assets.superyachttimes.com/photo/397501/image/large-3c2c4040a8060ff3b9d5d0a05b4fe870.jpg" data-gid="gid://syiq/Photo/397501">Described as the "First Icon" of the range, the SL80A intends to distill more than 40 years of <a data-gid="gid://syiq/Company/374" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Sanlorenzo (Company)">Sanlorenzo</a> design into what the shipyard calls the purest expression of its design philosophy. Devised under 24-metres, the SL80A is designed to deliver the openness, refinement and liveability typically associated with significantly larger yachts.<img src="https://photo-assets.superyachttimes.com/photo/397504/image/large-8113495dfc492d411659b809265baaa4.jpg" data-gid="gid://syiq/Photo/397504">The first SL80A features exterior design and interior design by <a data-gid="gid://syiq/Company/105" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Zuccon International Project (Company)">Zuccon International Project</a>, continuing the studio’s long-standing collaboration with the Italian shipyard that has shaped the evolution of the SL line for decades.Taut yet balanced proportions, clean architectural lines and a strong continuity between her hull and superstructure preserve the distinctive identity of the SL line. Her flybridge, which is a defining feature of the SL line, fits seamlessly into the yacht's silhouette, highlighting her elegance without adding visual weight. <img src="https://photo-assets.superyachttimes.com/photo/397502/image/large-e5489eb92275a143ef9bb950e314aaa9.jpg" data-gid="gid://syiq/Photo/397502">A defining feature of the SL80A is the further evolution of <a data-gid="gid://syiq/Company/374" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Sanlorenzo (Company)">Sanlorenzo'</a>s asymmetric architecture, which was first introduced by the shipyard in 2018. By relocating the side passage to starboard, the interior volume on the port side expands. This increases onboard liveability by up to 20 percent, while strengthening the flow between her interior and exterior spaces, without altering the yacht's balanced proportions.<img src="https://photo-assets.superyachttimes.com/photo/397505/image/large-b9c28e04016c5c824ff4d1e8130042a0.jpg" data-gid="gid://syiq/Photo/397505">Accommodation onboard the SL80A is arranged across four guest staterooms, including a full-beam owner’s suite. Her main deck is designed to be bright and open thanks to full-height windows that also provide uninterrupted sea views. <img src="https://photo-assets.superyachttimes.com/photo/397508/image/large-ee603728cded8784d7d31d7571340e38.jpg" data-gid="gid://syiq/Photo/397508"><img src="https://photo-assets.superyachttimes.com/photo/397511/image/large-9340e39cc8d89d66baf5ece8bfe32d96.jpg" data-gid="gid://syiq/Photo/397511" style="box-sizing: inherit; border: 0px; font-family: &quot;Open Sans&quot;, sans-serif; position: relative; max-width: 100%; margin: 1rem 0px; color: rgb(0, 0, 0); font-size: 13.6px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">Meanwhile, the asymmetric layout allows the saloon to feel wider and more architectural in character. A mezzanine-level helm preserves visibility while freeing up space for the living areas below.<img src="https://photo-assets.superyachttimes.com/photo/397510/image/large-beea15d848f8f06760a8dba08a589b4f.jpg" data-gid="gid://syiq/Photo/397510" style="box-sizing: inherit; border: 0px; font-family: &quot;Open Sans&quot;, sans-serif; position: relative; max-width: 100%; margin: 1rem 0px; color: rgb(0, 0, 0); font-size: 13.6px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">Inside, the yacht embraces a warm and contemporary theme, featuring warm materials such as Thai walnut, selected for its natural dialogue with the exterior teak decks. Throughout the yacht, bespoke "Azteca" parquet by Cadorin can be found, adding a geometric rhythm inspired by triangular forms. This pattern is repeated on wall panels and bed headboards to create a consistent look.<img src="https://photo-assets.superyachttimes.com/photo/397509/image/large-f31556ccb3ab8089a47edb9650a5bc58.jpg" data-gid="gid://syiq/Photo/397509" style="box-sizing: inherit; border: 0px; font-family: &quot;Open Sans&quot;, sans-serif; position: relative; max-width: 100%; margin: 1rem 0px; color: rgb(0, 0, 0); font-size: 13.6px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;">Moving outside, the aft cockpit opens fully onto the water, making it easier to enjoy the sea view. The spacious bow lounge can be transformed from a sunbathing area into a dining space, versatile for relaxing or entertaining.<img src="https://photo-assets.superyachttimes.com/photo/397506/image/large-1ec0eb8a4e0d528c7eacdb1784df9d31.jpg" data-gid="gid://syiq/Photo/397506">Commenting on the new model, Tommaso Vincenzi, CEO of <a data-gid="gid://syiq/Company/374" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Sanlorenzo (Company)">Sanlorenzo</a>, said: "SL80A represents the essence of our philosophy. It is not a simplified version of a larger yacht, but a synthesis of the experience we have built over decades with the SL line." <img src="https://photo-assets.superyachttimes.com/photo/397503/image/large-d84a66bc48999654b5c1edb30398974f.jpg" data-gid="gid://syiq/Photo/397503">The SL80A continues the evolution of <a data-gid="gid://syiq/Company/374" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Sanlorenzo (Company)">Sanlorenzo</a>'s SL range, noting that they are “translating the architectural intelligence, liveability and timeless elegance that have defined the series for more than four decades into its most compact interpretation to date”. According to <a data-gid="gid://syiq/Company/374" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Sanlorenzo (Company)">Sanlorenzo</a>, nine units have already been sold.All images provided courtesy of <a data-gid="gid://syiq/Company/374" href="#managed-by-system" rel="noopener noreferrer" target="_blank" title="Sanlorenzo (Company)">Sanlorenzo.</a>

Sanlorenzo unveils new SL80A model

Sanlorenzo has unveiled the new SL80A, featuring its signature asymmetric architecture in the most compact model of the SL range.